基于PLCC技术的汽车内数据传输应用研究-机械设计及理论专业论文.docxVIP

英文摘要ABSTRACT 英文摘要 ABSTRACT With the automobile technology developing towards digitization and informatation， the requirements control，communication，and net become more and more complex． The traditional point—to—point data transmission method can’t meet this any more，SO it’S necessary to develop new data transmission method．Basing on the computer net and fieldwork control technology,specially developed for the data transmission in automobile，automobile data bus has been developed．Those data buses apply special data lines to share data between ECUs in automobile．NOW there some data bus standards，among them the most widely used the CAN bus and the儿850 bus． Because those data buses need special data lines，and the ECUs in automobile have different requirements on data transmission，several data nets are needed in one automobile．This will increase the cost and difficulty to manufacture and maintenance． So in this research a new data transmission method is put forward first，data transmission by power line in automobile．This method realize data share between ECUs in automobile without increasing wiring． Many principle research and corresponding experiments have been done for this research．The research object is the automobile carrier communication system．The research route is listed in the following： Analyzing the principle of automobile carrier communication,analyzing the mechanic ofthe producing ofelectromagnetism interferences in automobile，developing electromagnetism environment detecting system in automobile，detecting and analyzing the electromagnetism environment in automobile，developing the model of automobile carrier communication system，analyzing the communication strategy of automobile carrier communication system，developing the automobile carrier communication system． The researching contents in the following： (1)Analyzing the principle of automobile carrier communication and the possible implement way,and analyzing all the problems that are needed to solve for