基于表面改性应用的半导体激光器直接光束整形系统的光学模拟-光学工程专业论文.docxVIP

华中科技大学硕士学位论文 华 中 科 技 大 学 硕 士 学 位 论 文 II万方数据 II 万方数据 Abstract For direct industrial processing applications, the high power diode laser has properties of high efficiency, reliability, long lifetime, and compactness. This thesis is focused on the optical modeling of a widely used diode laser direct beam shaping system, and successfully finished the the design of a Kilowatt diode laser beam shaping system, which based on the applications of the material surface processing. The main content of this thesis is as following: The operating characteristics of diode-laser with robot-arm cladding system have been analyzed, and the necessity of its optical simulation has been explained else. Furthermore, the four fundamental elements of the diode laser beam direct shaping system have been introduced. They are the diode laser array with fast-axis collimation lenses, the slow-axis collimation and homogenization structure, the incoherent beam combination structure, and the focusing lens group or fiber-coupled structure. For the direct application in the material surface processing, the diode laser with large optical cavity is commonly used. And, the fast-axis divergence angle has been compressed to nearly diffraction limit with use of high-refractive index cylindrical lens (θ≈0.9948 mrad). An equivalent source modeling approach has been employed to model the spatial beam combination procedure. And, the slow-axis collimator has been designed, with the slow-axis divergence angle compressed to less than 10 mrad. Furthermore, the focusing system with the use of the Cooke triplet has been designed. According the requirements of the research, this thesis successfully finished the the design of the Kilowatt diode laser beam shaping system, which based on the applications of the material surface processing. The total length of the system is 0.45m; the focusing spot is likely a narrow rectangular strip with uniform intensity distribution in the slow-axis and aspect ratio changing from