基于浮力的三维实体测量的实体造型研究-机械电子工程专业论文.docxVIP

Abst Abstract PAGE iii PAGE iii 万方数据 Abstract The data processing of 3D measure and reconstruction are the key technology in reverse engineering. Studying on non-contact measure and 3D reconstruction based on buoyancy is important, meaningful and prospect able. Responding to the characters of measure data, a study on solid reconstruction，surface reconstruction and error analysis of reconstruction is implemented in SolidWorks frame with the VB as the redevelopment language. Based on OOP, the main frame is figured out. The pre－process of volume element includes data redundancies excluding, data layering and void judgment etc. The space position enumeration is applied to construct solid model in the SolidWorks with Parasolid core. The SolidWorks is called by VB to realize the solid model construction in cub volume element. The program of the layer storage, exit in background, format change improves the efficiency of solid construction and reusing. The constructed solid surface is replaced by four edge NURBS surface. The data acquired on the outline is sorted to obtain the data and order of the interposal surface. The implement in void and solid layer is described detailly. The surface is constructed by a series of fit curve line using the enveloping method. The trammel of angle directing line is applied to solve the surface distortion. The validity of this method is approved by the zebra texture and volume display function of SolidWorks. The real one and idea one of concrete and void model is compared by the volume value. The solid surface error is shown in the Imageware soft. The model accuracy is analyzed by the part slice circle of constructed solid model. Key Words: reverse engineering data processing entity modeling construct surface 目 目 录 目 录 摘 要 i HYPERLINK \l _TOC_250001 Abstract iii HYPERLINK \l _TOC_250000 目 录 iv 第一章 绪论 1 §1.1 课题来源和意义 1 §1.1.1 课题来源 1 §1.1.2 课题的研究背景和意义 1 §1.2 三维实体造型的研究现状 2 §1.3 本文主要研究内容 4 第二章 软件框架设计及数据前处理 5 §2.1 软件开发工具的选择