落料拉深冲孔翻边复合模设计说明书.doc

word格式.整理版 升降器外壳复合模的设计 摘要 模具是“工业之母”，是工业生产中不可或缺的一部分，它在工业生产中的地位已经变得越来越重要。一个国家的制造业发不发达取决于这个国家的模具水平高不高，模具水平的高低是衡量制造业水平高低的重要标志。此外模具在很大程度上决定了产品的质量、效益以及对新产品的开发能力。 本次设计的零件为宽凸缘的汽车玻璃升降器外壳，采用的材料为10钢，工件厚度为1.5mm，保证了工件具有良好的强度和硬度。该工件形状简单，结构对称，利于进行合理的排样，并且废料少，此外拐角处为圆弧过渡，适合采用冲压加工。 该工件需要经过落料、三次拉深、冲孔、翻边和切边等工序。工艺方案适合采用落料首次拉深复合模、冲孔翻边复合模、其他工序用单工序模。在设计中除了要完成必要的计算部分，还要利用CAD制图软件绘制两幅装配图和主要零部件的零件图。 关键词：冲压加工；复合模；冲压工艺；CAD THE DESIGN OF LIFTER SHELL COMPOUND DIE ABSTRACT Mold is “the mother of industry”, an integral part of industrial production, it’s position in the industrial production is becoming more and more important. The mould technology level of a country has already become an important symbol to measure the level of the national manufacturing industry. In addition, the mold to a large extent determines the quality, efficiency of products and the development capabilities of new product. The design of the part is a wide flange automobile glass lifter shell, the material is 10 steel, the thickness of the workpiece is 1.5mm, it’s guarantee the workpiece has good strength and hardness. The workpiece has a simple shape and symmetrical structure, is advantageous to layout reasonable, and has less waste, in addition, the corner is the arc transition, it’s suitable for stamping process. The workpiece needs to through blanking, drawing three times, punching, flanging and cutting processes. The process scheme is suitable for blanking and the first time drawing compound die, punching and flanging compound die, other processes using single process mode. During the design, it’s not only need to complete the necessary calculation part, but also need to use the CAD drawing software draw two pieces of the assembly drawing and the main parts drawing. Key words: punching; compound die; stamping process; CAD 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc390376716 1 绪论 PAGEREF _Toc390376716 \h 1 HYPERLINK \l _Toc390376717 1.1 课题研究背景及目的 PAGEREF _Toc390376717 \h 1 H