基于单片机的高精度多路数据采集系统方案.docVIP

PAGE word格式.整理版 摘 要 MSP430F425为TI生产的一款低功耗单片机，其片内资源丰富，参考资源众多，接口多，易编程，并自带3通道16位ADC，是进行数据采集、误差校正、数值计算及显示的核心芯片。使用16位的MSP430F425型单片机来设计高精度多路数据采集系统，可以大大提高系统效率。原来由小规模集成的数字逻辑电路及硬件程序控制器组成的采集系统被微处理器控制的采集系统所代替。由微处理器去完成程序控制，数据处理及大部分逻辑操作，使系统的灵活性和可靠性大大的提高，系统的硬件成本和系统的重建费用大大的降低。系统还包含运算放大器、高稳定电源、段码显示等模块。 关键词：单片机，高精度，多通道，数据采集 ABSTRACT For the production of a TI MSP430F425 low power single chip, the chip is rich in resources, reference resources, large, multi-interface, easy programming, and comes with 3-channel 16-bit ADC, with the data acquisition, error correction, numerical calculation and display core chip. Use 16-bit MSP430F425 MCU to design high-precision multi-channel data acquisition system, can greatly improve the efficiency of the system. Originally from the small-scale integrated digital logic circuits, and hardware component of the acquisition program controller microprocessor control system was replaced by the acquisition system. From the microprocessor to complete the process control, data processing and most of the logic operation, the systems flexibility and significantly improved the reliability of the system hardware cost and system cost significantly reduces the reconstruction. System also includes operational amplifiers, high stability power supply, display module code segment. Key words: Single chip, high precision, multi-channel, data acquisition 目 录 TOC \o 1-2 \h \z \u HYPERLINK \l _Toc262110131 1 绪论 PAGEREF _Toc262110131 \h 1 HYPERLINK \l _Toc262110132 1.1 高精度多路数据采集系统的研究及应用现状 PAGEREF _Toc262110132 \h 1 HYPERLINK \l _Toc262110133 1.2 课题研究的目的和意义 PAGEREF _Toc262110133 \h 1 HYPERLINK \l _Toc262110134 1.3 课题需使用的软件产品介绍 PAGEREF _Toc262110134 \h 2 HYPERLINK \l _Toc262110135 2 MSP430F425数据采集系统的原理图设计 PAGEREF _Toc262110135 \h 5 HYPERLINK \l _Toc262110136 2.1多通道数据采集系统 PAGEREF _Toc262110136 \h 5 HYPERLINK \l _Toc262110137 2.2 控制芯片MSP430F425 PAGEREF _Toc262110137 \h 6 HYPERLINK