微束等离子喷涂Al2O3陶瓷涂层特性.PDF

Al2 O3 51 2 3 Al O Characteristics of Microplasma Spraying of Al2O3 Ceramic Coatings , , , ( , 710049) - , , , I Chang jiu SUN Bo HAN Feng WANG Min (Xi an Jiaotong U niversity, Xi an 710049, China) : 2kW Al O 2 3 , X , , , , , , 38kW Al O 2 3 : ; ; ; : T G 174: A : 1001-4381 ( 2004) 12-0051-05 2 3 Abstract : Al O coating was deposited by microplasma spraying system through axial powder injection at a low power level about 2kW. T he effects of plasma arc power, operating gas flow and spray distance on particle velocity during spraying the microstructure and properties of the coatings, were investigated T he coating microstructure was examined by optical microscopy and the coating. , - . phase structure was examined by X ray diffraction analysis T he coating property was characterized by abrasive wear loss. The particle velocity in flight was measured by the particle velocity/ temperature measurement system based on thermal radiation T he results showed that the particle. velocity was influenced significantly by plasma arc power operating gas flow and spray distance, . T he velocity increased with increase of plasma arc power and operating gas flow decreased with, increase of spray distance. On the other hand, the abrasive wear loss of the coatings decreased with the increasing in arc