VW 50127-2013-04-PA66成品零件的材料要求.pdf

Group standard VW 50127 Issue 2013-04 Class. No.: 55112 Descriptors: door handle, pull rod, bushing, switch, joint, clips, loudspeaker grille, lever, bearing, vehicle interior part, polyamide 66, PA66 Polyamide 66, Finished Parts in the Passenger Compartment Material Requirements Previous issues VW 50127: 2004-11, 2013-02 Changes The following changes have been made to VW 50127: 2013-02: – Section 3.2 Properties revised – Section 3.7 Processing quality revised – Table 1 and Table 2 revised 1 Scope This standard defines the material requirements, for example, for interior door handles and other parts in the vehicle interior that are made of PA66 with different levels of glass fiber content or glass fiber and mineral mixtures. VW 50133 applies to PA66 applications outside of the vehicle interior. PA66 components that are in contact with coolant must be evaluated as per TL 52682. 2 Description Example of description for type with 15% glass fiber reinforcement: PA66-GF15 as per VW 50127 – PA66-4 or Example of description for type with 15% glass fiber reinforcement and 25% mineral reinforcement: PA66-GF15-MD25 as per VW 50127 – PA66-13 Always use the latest version of this standard. Page 1 of 12 This electronically generated standard is authentic and valid without signature. The English translation is believed to be accurate. In case of discrepancies, the German version is alone authoritative and controlling. Numerical notation acc. to ISO/IEC Directives, Part 2. Technical responsibility