基于PLC定量给料机控制系统设计说明书.docVIP

word格式可编辑 word格式可编辑 专业资料整理 专业资料整理 PAGE PAGE II 摘要 随着工业生产的迅速发展，固体定量给料系统作为一项实用型的技术被广泛应用于冶金、化工、水泥、建材和食品等工业领域。在这样的环境下定量给料机的需求量日益增大。本系统采用电磁阀和流量计给料机作为定量给料设备，给料机采用控制流量来达到定量给料的目的。定量给料系统的PLC控制系统是机电一体化发展的必然结果。 本论文针对定量给料机的特点，并PLC控制技术，对定量给料系统进行的研究，其主要内容如下： 了解定量给料机控制系统的工作原理； 2、掌握PLC的硬件构成，工作原理，完成对PLC的选型； 3、设计定量给料机的控制系统； 4、用STEP7完成对控制系统的编程。 关键词：给料；定量；PLC；控制系统。 Abstract With the rapid development of industrial production，the solid constant feeding system which is a practical technology has been widely used in metallurgy, chemicals, cement, building materials, food and as well as other industry circles. So, in this situation, the demand of constant feeder is increasingly augmented. This system adopts the electromagnetic valve and flowmeter feeder as the constant feeding device, the feeder achieves the goal of constant feeding by controlling the flow. The PLC control system of constant feeding system is the inevitable outcome of the development of mechatronics. This article focuses on the characteristics of constant feeder, and PLC control technology, studies the constant feeding system. The main contents are as follows: 1、Understand the operating principle of the constant feeder control system ; 2、Master the PLC hardware structure, working principle, finish the selection of PLC type ; 3、Design the control system of constant feeder ; 4、Finish the programming of the control system with STEP7. Key words: Feeding;Dosing ;Programmable Logic Controller;The control system. word格式可编辑 专业资料整理 专业资料整理 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc14651 摘 要 PAGEREF _Toc14651 III HYPERLINK \l _Toc2602 Abstract PAGEREF _Toc2602 IV HYPERLINK \l _Toc26763 目 录 PAGEREF _Toc26763 V HYPERLINK \l _Toc24007 1 绪 论 PAGEREF _Toc24007 1 HYPERLINK \