基于电流补偿策略转矩分配函数法抑制整距绕组分块转子SRM转矩脉动.pdfVIP

2014 年 1 月 电 工 技 术 学 报 Vol.29 No. 1 第 29 卷第 1 期 TRANSACTIONS OF CHINA ELECTROTECHNICAL SOCIETY Jan. 2014 SRM 1,2 稰 1 1. 323000 2. 310027 TSF TM352 Torque-Ripple Minimization for SRMs with Segmental Rotors and Fully-Picthed Windings based on TSF by Current Compensation Strategy Chen Xiaoyuan1,2 Peng Yixu 1 （1. Lishui University Lishui 323000 China 2. Zhejiang University Hangzhou 310027 China） Abstract Comparing with conventional switched reluctance motor(SRM), SRMs with segmental rotors and fully-pitched winding have shown an increase in torque per unit copper loss of the same outside diameter and core length, and a decrease in windage losses and iron losses at high speeds greatly. However, the torque ripple is larger than that of conventional SRM. In order to suppress the torque ripple at low speed, the torque sharing function(TSF) method is utilized. The smooth torque is obtained through controlling the phase torque component produced by phase current. While for high speed operation, the phase current can not track the current reference when phase current increases rapidly and the phase current is uncontrollable because the phase is shut up. Thus to solve problem in this paper, the method of compensating phase t