泡沫金属相变材料凝固传热过程的数值分析-河北工业科技-河北科技.PDF

28 1 河 北 工 业 科 技 Vol. 28, No . 1 2011 1 H ebei Journal of Industrial Science and Technology Jan. 2011 : 10081 34( 2011) , , ( 河北科技大学机械电子工程学院, 河北石家庄 0 0018) : 利用计算流体力学软件FLU ENT 凝固/ 熔化模 , 对填充以及未填充泡沫金属的2 种相 变材料蓄热球的相变传热过程进行数值模拟研究, 得到了在第1 类边界条件下蓄热球放热过程中 的温度场分布相界面移动规律研究结果, 表明与单纯填充相变材料的蓄热球相比, 填充泡沫金 属的相变材料蓄热球可以有效减少其放热时间, 提高蓄热系统的放热速率 : 泡沫金属; 相变传热; 蓄热球 : T K02; TK 124 : A Numerical simulation on heat transfer of phase change in heat storage ball filled w ith metal foam CAO Xiangru, CU I Haiting, JIAN G Jingzhi ( College of Mechanical and Electronic Engineering, H ebei University of Science and Technology, Shijiazhuang Hebei 0 0018, China) Abstract : By using solidification/ melting models of FLUENT software, the processes of heat change on two heat storage balls filled with or without metal foam are numerically simulated. Temperature field and change of phase interface are obtained under the first kind of boundary condit ion. The results indicate that the com plet e solidification time for the ball w it h metal foam is greatly shorter t han that w ith paraffin only, due t o the solidification rate enhancement of heat storage system. Key words: foam metal; heat transfer of phase change; heat storage ball , , [ 13] , , , , [ 4] , , [ ] , ,