万家寨水利枢纽混凝土重力坝设计 ().doc

河北工程大学毕业设计 PAGE 1 摘 要 关键词: 混凝土重力坝 溢流坝 挡水坝 本设计为万家寨水利枢纽设计.万家寨水利枢纽工程位于黄河托克托至龙口峡谷,其控制流域面积395000平方公里,正常蓄水位977m,校核蓄水位980.4m,该坝为实体混凝土重力坝,最大坝高为928.16m,设计完成后的万家寨重力坝具有供水,发电,防洪的作用. 设计内容包括枢纽布置,枢纽泄水能力验算,坝体剖面设计,导墙设计,消能设计,坝体应力与抗滑稳定验算,细部构造,与地基处理.其中溢流表孔采用WES曲线设计,底流消能;底孔采用无压形式,底流消能. 设计过程中我们大量翻阅了大量的文献、资料，并对实际工程做了改进。设计过程包括初稿，修改，复稿，再修改，成稿的过程。 Abstract Key words: concrete gravity dam spillway retaining dam  The design for the Wanjiazhai Water Control Project Design. Wanjiazhai Water Control Project on the Yellow River valley Tuoketuo to Longkou, its control drainage area 395,000 square kilometers, the normal water level 977 m, checking water level 980.4 m, the dam of concrete entities Dam, the largest dam height to 928.16 m, after the completion of the design of the Wanjiazhai Dam with water supply, power generation, flood control role.  Design elements include the general layout, checking hub discharge capacity, the dam profile design, training wall design, energy dissipation design, the dam stress and sliding stability checking, detail construction, and ground treatment. Overflow which used WES-table curve design, At the end of energy dissipation; Bottom adopts the form of pressure, at the end of energy dissipation. The design process, we read a lot a lot of literature, information and practical projects to do to improve. The design process, including draft amendments on rehabilitation, re-edits, a draft of the process. PAGE 1 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc230964224 1. 基本资料 1 HYPERLINK \l _Toc230964225 1.1. 工程概况 PAGEREF _Toc230964225 \h 1 HYPERLINK \l _Toc230964226 1.2. 地形条件 PAGEREF _Toc230964226 \h 1 HYPERLINK \l _Toc230964227 1.3. 地质条件 PAGEREF _Toc230964227 \h 1 HYPERLINK \l _Toc230964228 1.4. 工程特性 PAGEREF _Toc230964228 \h 2 HYPERLINK \l _Toc230964229 1.5. 其他 PAGEREF _Toc230964229 \h 4 HYPERLINK \l _Toc230964230 1.6. 万家寨水利枢纽坝址形图和坝轴线地质剖面图 PAGEREF _Toc230964230 \h 5 HYPERLINK \l _Toc230964232 2. 坝段坝线坝型选择 PAGEREF _Toc230964232 \h 6 HYPERLINK \l