基于Wifi多功能监护床无线控制器①.PDFVIP

计 算 机 系 统 应 用 2014 年 第 23 卷 第 6 期 基于 Wifi 的多功能监护床无线控制器① 魏 越, 王金海 (天津工业大学 电子与信息工程学院, 天津 300387) 摘 要: 为减轻医护人员患者家属的劳动强度和护理负担，提高重症患者的自护理能力，提出了一种基于 wifi 多功能监护床的无线监护系统，该系统主要由 STM32F103VET6 中央处理器、wifi 模块 Marve Ⅱ88W8686、TFT 显示模块 SSD1963 和基于 android 系统并支持 wifi 功能的手持终端等部分构成，可实现对监护系统受控终端信 号的控制、监测和报警等功能. 系统采用 wifi 无线通信技术和对称加密技术完成数据交互并实时显示当前状态， 实验结果表明，该系统性能可靠，硬件成本较低，能够准确的实时监测受护理人的护理状态，适合在医护行业 推广使用. 关键词:wifi; STM32; 监护床; Android 系统 Wireless Controller for A Multi-function Nursing Bed Based on Wifi WEI Yue, WANG Jin-Hai (School of Electronic and Information Engineering, Tianjin Polytechnic University, Tianjin 300387, China) Abstract: In order to reduce the labor intensity of medical staff and patients’s families, and improve the self-care ability of patients. In this paper, a wireless monitoring system for a multi-function nursing bed is developed based on wifi technology. The system is mainly composed of a microcontroller STM32F103VET6, wifi wireless communication module MarveII88W8686 and a handheld terminals which based on android system and support wifi communitions. It has the function of monitoring, controlling and alarm. The system makes use of wifi wireless communitions technology and symmetric eneryption technology to complete the interaction and real-time display.The experimental results show that the system has a high reliability characteristic and low-cost hardware. It can accurate display monitor state, and is suitable for extending and enlarging in health care industry Keywords: wifi; STM32; nursing bed; Android system 目前社会已经进入老龄化阶段，由于各种疾病造 实时界面进行数据交互的终端控制器，从而实现了网 成偏瘫或者行走不便的病人，在治疗和康复的过程中， 络的通信和多功能监护床系统的实时监控. [1]. 国内所 需要一个有效的多功能起居床，以方便使用 用的护理床主要以手动性的机械控制为主，技术含量 1 系统设计总体描述 不高，控制方式单一，无法满足各种使用者对护理床