毕业设计（论文）-不锈钢传动座冲压工艺分析及模具设计.docVIP

不锈钢传动座冲压工艺分析及模具设计 摘要：本设计主要介绍冷冲压模具级进模模具的有关设计，级进模设计主要步骤有： 分析工件的工艺性、确定工艺方案、（工序性质与数量的确定、工序顺序的确定、工序组合方式的确定）、确定模具总体结构方案（模具类型、操作与定位方式、卸料与出料方式、模架类型及精度）、进行有关工艺与设计计算（排样设计与计算、计算冲压力与压力中心、计算凸、凹模刀刃尺寸及公差）、设计、选用模具零部件，绘制模具总装草图（确定凹凸模具结构形式计算凹模轮廓尺寸及凸模结构尺寸、选择定位零件、设计选用卸料与出件零件、选择模架，并确定其他模具零件的结构尺寸或标准规格、绘制模具 总装草图校核压力机）、绘制模具总装图和零件图（模具总装图的绘制、模具零件图的绘制）确定模具零件加工工艺过程、确定模具装配工艺过程、编写有关技术文件。 关键词：级进模 工艺方案 压力中心 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT II The analysis of stamping technology and die design of steel transmission Abstract: This design mainly introduces the design of cold stamping progressive die,progressive die design main steps: analysis process, determine the process,the workpiece (process to determine the nature and quantity determination,sequence determination, process combination mode), determine the mold overall structure scheme (die type, operation and positioning method,discharge and the frame type and feeding method, accuracy), related technology and design (design and calculation, layout and calculate the stamping force and center of pressure, convex, concave die blade calculation of dimension and tolerance), design, selection of die parts, drawing die assembly sketch (determine the concavo convex mould structure calculated die contour size and punch structure size, select the positioning parts, design and selection of discharge and the parts, select the mold, and other mold parts structure size or standard specification, drawing die assembly drawings checking Press), draw up the mold assembly drawing and parts drawing (final assembly drawing, mold part drawing) determined the mold parts processing process, determined the mold assembly process, and prepare the relevant technical documents. Keywords: progressive die Process plan The center of pressure PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT III 目 录 1 前言 1 1.1模具发展现状 1 1.2模具工业技术结构现状 2 1.3 模具工业配套材料，标准件结构现状 2 1.4模具工业产业组织结构现状 3 1.5模具的发展趋势 4