采矿工程毕业设计（论文）-水城集团汪家寨矿矿井开采设计.doc

PAGE 论文题目：水城集团汪家寨矿矿井开采设计 专 业：采矿工程 学 生： （签名） 指导老师： （签名） 摘要：本设计根据在贵州水城矿业集团汪家寨矿收集的资料，以及设计指导书的要求下和矿山设计手册，结合专业知识，对汪家寨矿的开拓设计。1.根据本矿的矿井储量设计1.5 Mt/a；2.根据地质资料，提出方案进行技术经济比较，本矿井采用双斜井开拓方案；3.根据本矿的C409煤层的赋存特点，对C409煤层进行划分为采区式，采用倾向长壁式综合机械化放顶煤采煤方法。同时，根据去划分进行巷道布置；4.根据井筒形式选取提升方式，主井运输采用皮带运输，主要将煤从工作面运输到地面；副井运输轨道运输，主要是下料，下设备以及排放矸石5.根据矿井的实际情况进行设备选型。6.对矿山进行评价。 ]关键词：井田开拓；倾斜长壁；综合机械化放顶煤采煤法；矿井设计；技术经济等。 全套图纸加扣 3012250582 Subject: Mine Design of Meihua of Shuicheng wangjiazhai Coal Industry Group Specialty :Mining engineering Name : (Signature) Instructor: (Signature) Abstract : Based on the design of Guizhou Shuicheng Mining Group Wangjiazhai mine of information collected and the design of the guidance and request mine design manual, combined expertise of Wangjiazai Mine pioneering design. 1. According to the Mine Design mine reserves of 1.5 million tons / year; 2. According to geological data, put forward proposals for technical and economic comparison, the double-Incline mine development programs; 3. According to the Mine C409 seam occurrence features of the C409 for coal mining area classified as type, tend to use long wall-integrated mechanized coal caving mining method. Meanwhile, according to apportionment roadway layout; 4. According to upgrade selected through shaft, the main shaft transport belt used transport, will mainly transport coal from the face to the ground; Rail transport belonging to the transport, mainly cutting and lower equipment and waste emissions; 5. According to a shaft of the actual equipment selection. 6. Evaluation of mine. Keywords : Mine development; Tilt long wall; Comprehensive mechanized coal caving mining method; Mine design; Technology economy. 前 言 毕业设计是采矿专业学生在校期间最后一个，也是最关键、最重要的一个学习环节，通过做完整个设计，使我把大学所学的课程全部融会贯通，为即将走上工作岗位的我建立坚实的基础。为了顺利完成本设计，我和张慧灵同学于2007年3月到贵州水城矿业集团汪家寨矿进行了为期半个月的实习。在此期间，了解并熟悉了汪家寨矿的生产情况，认真学习矿井的开拓方式，采煤方法，矿井通风等重要内容。