基于数值模拟技术的板料成形回弹预测的研究-机械制造及其自动化专业论文.docxVIP

华南理T大学硕士学位论文Abstract 华南理T大学硕士学位论文 Abstract Sheet metal forming is a very important manufacturing technology in modern industry，the springback phenomenon is an inescapable problem of bending，and springback in sheet metal make the sheet metal担shape apart from the shape of the tools after forming process and it will influent the products?dimension precision．If the springback in sheet metal can be predicted before forming，we can compensate it in the stage of mold designing，and can improve the products?precision and save large manpower and material resources．Because influenced by many factors，SO it is difficult to express the springback in theory，the sheet metal forming numerical simulation base on the finite element technology make it is possible to solve the problem．in this paper select the U—shape as the study object，study the springback rule of this kind of products combined with the numerical simulation technology． Sheet metal forming numerical simulation is a strong nonlinear problem including geometric nonlinear，material nonlinear and contact nonlinear，and the precision of numerical simulation is influence the precision of the springback prediction，in this paper，the key technology of numerical simulation is described in detail，and use the U—typed sheet parts deep draw springback in UMISHEET’93 to veri fy the reliability of the key technology． The springback in sheet metal forming is influenced by many factors，it is impossible to build a mathematics model of the springback prediction model include all of these factors，in this paper，design the experiments of these factors，collect the experiments?data with the numerical simulation methods，and use this data to collate and filter the factors due to its influent degree of springback，and analyse the influent trend of each factor． Then design new experiments of the reserved factors，and statistic regress of the great deal of experimental data，to the two kinds of bending methods 一free bending and correct bending，built the