元件可靠性跟踪算法.doc

配电网可靠性薄弱元件辨识模型及应用 冯光1，王文博1，胡博2，陈娅2，王蔓莉2，缪书唯2 （1. 国网河南省电力公司 电力科学研究院，郑州 河南省 450052；2. 重庆大学 输配电装备及系统安全与新技术国家重点实验室， 重庆大学， 重庆市沙坪坝区 400044） 摘要：可靠性跟踪方法是辨识电力系统薄弱环节的主要方法之一，通过跟踪分析可得到各元件对系统可靠性指标的贡献率，分析得到系统的薄弱环节。基于配电网分块算法和可靠性跟踪准则，本文提出配电网元件可靠性双层分摊模型，深入分析了可靠性跟踪指标，基于跟踪结果辨识出系统的薄弱环节，并给出可靠性的改善措施。应用可靠性跟踪原理以及双层分摊模型，对IEEE RBTS BUS6系统以及某地区实际配电系统进行了算例分析，辨识出以上系统的薄弱环节，并给出了可靠性改善措施。 关键词：配电网；可靠性跟踪；薄弱环节；贡献率 中图分类号: TM93 文献标识码：B 文章编号：1001-1390（2016）00-0000-00 Weak parts components identification model of electrical electrical distribution network reliability and its application Wang Wen-bo1, Feng Guang1, Hu Bo2, Chen Ya2, Wang Manli2, Miao Shuwei2 (1. State Grid Henan Electric Power Company Research Institute, Zhengzhou 450052,China, China; . 2. State Key Laboratory of Power Transmission Equipment System Safety and New Technology, Chongqing University, Shapingba District, 400044,China, China) Abstract: Reliability tracking is a major method to identify weaknesses links (inappropriate installed transformers, lines and etc.) in power system, the contribution rate of each component on system reliability index is obtained by tracking analysis, and then, the weakness links in power system can be found. Double-sharing model of distribution network element reliability is proposed based on distribution network Section section algorithm and reliability tracking criteria in this paper, and reliability tracking indicators is analyzed deeply, and the weaknesses links in power system is identified based on tracking results, then putting forward the reliability improvement measures are put forward. . Application of the principles of reliability tracking and double-sharing model, IEEE RBTS BUS6 system and a given actual distribution system as examples, we identify the weaknesses of these two systems, and puts forward the reliability improvement measures. Key words: electrical distribution network, reliability tracking, weaknesses links, contribution rate 0 引 言 配电网系统结构复杂，包含元件众多[