毕业论文-宁波市某小区10#住宅楼设计.docVIP

宁波某小区10#楼毕业设计 PAGE 1 本科毕业设计 土木工程 宁波市某小区10#住宅楼设计 Ningpo some plot 10# building design 宁波市某小区10#住宅楼设计 摘要：本次毕业设计是宁波市某小区10#住宅楼设计，包括建筑设计和结构设计两部分内容。建筑面积约为6212m2。建筑总共20层，每层分为两个单元，每个单元两户人家，顶层为复式结构。建筑结构主要采用异形柱框架形式，建筑绘图采用天正和AutoCAD软件，计算采用PKPM软件。通过本多层混凝土框架结构的完整设计，让我能熟悉相关规范、规程、手册和工具书，在工程制图、理论分析、计算机应用等综合能力方面得到锻炼和提高，同时让我能综合地运用所学的基础理论知识和专业知识来解决实际的工程设计问题。 关键字：钢筋混凝土住宅楼；框架;建筑设计；结构设计 Ningpo some plot 10# building design Abstract: The design is scheme of a 20-storey reinforced concrete residential including two-part architecture design and structure design. The measure of the building is 6212 m2, the agent structure is 20 layers, and every floor is divided into two departments, every department has two doors and the top layer is the multiple structure. The construction structure mainly uses the frame form with the Heteromorphous column.Architecture design depend on Tarch software,and the structural design uses the pkpm software . Through the graduation design, Let me be familiar with related standards, procedures, manual and reference book, in engineering drawing, theoretical analysis, computer applications, and other comprehensive ability get exercise and improve , Meanwhile let me can comprehensively the learned basic theoretical knowledge and expertise to solve practical engineering problems . Key words: reinforced concrete residential; frame.; architectural design ;structural design 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc336 1 毕业设计任务书 PAGEREF _Toc336 1 HYPERLINK \l _Toc28120 1.1 建筑方案构思 PAGEREF _Toc28120 1 HYPERLINK \l _Toc20824 1.2 建筑施工图设计 PAGEREF _Toc20824 1 HYPERLINK \l _Toc4345 1.3 结构设计 1 HYPERLINK \l _Toc9062 1.3.1结构设计计算书 1 HYPERLINK \l _Toc2336 1.3.2结构施工图 PAGEREF _Toc2336 2 HYPERLINK \l _Toc3615 2 建筑设计说明 PAGEREF _Toc3615 2 HYPERLINK \l _Toc29968 2.1 工程概况 PAGEREF _Toc29968 3 HYPERLINK \l _Toc21795 2.2 设计依据 PAGEREF _Toc21795 3 HYPERLINK \l _Toc21032 2.3 设计标高 PAGEREF _Toc21032 3 HYPERLINK \l _Toc12176 2.4 建筑做法 3 HYPERLINK \l _Toc21854 3 结构工程软