电源设计实例.docVIP

FLYBACK PRACTICAL DESIGN EXAMPLE SWITCHING POWER SUPPLY SPECIFICATION 1. INPUT: 1.1 VOLTAGE: UNIVERSAL AC 90V-AC260V SINGLE PHASE. 1.2 FREQUENCY: 47Hz-63Hz. 1.3 RMS CURRENT: 2A Max. 1.4 INRUSH CURRENT: 30A Max. WHILE COLD START AT PEAK ON FULL LOAD, 25℃ AMBIENT. 1.5 EFFICIENCY: 70% Min. AT NOMINAL LINE INPUT, FULL LOAD. 2. OUTPUT: 2.1 DC OUTPUT: Voltage 15.0V MAX. Load 2.0A MIN. Load 0.1A Regulation +/- 5% Ripple Noise 150mV NOTE: FOR RIPPLE NOISE MEASUREMENT, USE A 20 MHz BANDWIDTH FREQUENCY OSCILLOSCOPE, AND ADD 0.1uF MULTILAYER CAPACITOR A