电子式互感器校验系统的研究 李开成.pdfVIP

总第46 卷 第528 期 电测与仪表 Vol.46 No.528 2009 年 第12 期 Electrical Measurement Instrumentation Dec. 2009 电子式互感器校验系统的研究 李开成，李振兴，易杨 （华中科技大学电气与电子工程学院，武汉430074） 摘要：介绍的校验系统基于Labview平台，通过读取合并单元的数据，配合高精度标准表，结合同步卡和数字信号 处理实现对互感器的检验，对于校验10~500kV电压等级的电子式电压互感器和额定电流为5~5000A 的电子式 电流互感器能够达到万分之五的精度。文中介绍了系统组成和主要的检测原理，并给出了实验测试和现场测 试。测试结果表明，本测试系统能满足对电子式互感器比差和角差进行校验的要求。 关键词：电子式互感器；合并单元；校验；智能电网 中图分类号：TM452 文献标识码：B 文章编号：1001-1390 （2009）12-0043-05 Study on Calibration System for Electronic Instrument Transformers LI Kai-cheng ，LI Zhen-xing ，YI Yang （School of Electrical and Electronic Engineering ，Huazhong University of Science and Technology ， Wuhan 430074 ，China） Abstract: This paper introduces a calibrating system which is based on LabView platform. It can realize the calibration for electronic voltage transformer and current transformer through reading the data of the merging unit, coordinating with the high degree of accuracy standard meter and combining with synchronous cards and digital signal processing. The system reaches measurement accuracy up to 5/10000 for 10kV ~ 500kV electronic voltage transformer and the electronic current transformer rated current 5~ 5000A .In the paper, the system structure and the main testing principle are given. It also provides the experimental and field test results. The results show that the system can meet the need of calibration for ratio errors and angular differences of electronic voltage transformer and current transformer. Key words: electronic voltage and current transformer, merging unit, calibration , smart grid 0 引 言 500kV 电压等级的电子式电压