液压缸设计说明书3.docVIP

PAGE 2 - 3MN双立柱校直机设计（液压缸部件） 学生：彭杰 机电与建筑工程学院 指导老师：夏书敏 机电与建筑工程学院 摘要 本论文主要完成3MN双立柱校直机的设计，通过PLC来控制液压件运动，从而实现校直的功能。按导师的要求，我们这组四人分工协作。本人主要完成液压缸部件的设计，其间任务包括液压机的装配图、液压缸的装配图及零件图，还有一份设计说明书。 设计的具体方法是依据导师的要求进行具体的设计计算及校核。借助于图书馆里的资源，选取关于液压缸设计方面的书进行设计。在这期间，我们小组进行内部的讨论与交流，协调设计方面的参数，对其他同学的设计提出建议与质疑，使设计更加优化。 经过半学期的努力，我们的设计取得了完满的成功，设计的到了导师的肯定。在设计之中，我们体会到了分工协作和各负其责的好处，同时，我们相互帮助，相互提意见很好地促进了设计的不断优化，于是我们最终完满地完成了设计任务。 关键词 校直机 双立柱 液压 Abstract The present paper mainly completes the 3MN two column alignment machine designs, controls the hydraulic pressure movement through PLC, thus realizes the alignment function. According to teachers request, our group of four person of cooperation based on division of labor. Myself mainly complete the hydraulic cylinder parts design, during duty including hydraulic presss assembly drawing, hydraulic cylinders assembly drawing and detail drawing, but also some design instruction booklet. the design concrete method is carries on the concrete design calculation and the examination based on teachers request. With the aid in the library resources, selects about the hydraulic cylinder design aspect book carries on the design. In this period, our group carries on the internal discussion and the exchange, designs the aspect coordinated the parameter, to other schoolmates design proposed that the suggestion and the question, make the design to optimize. after the semester endeavor, our design has obtained the perfect success, the design to teachers affirmation. During the design, we realized the cooperation based on division of labor and had own responsibility the advantage, simultaneously, we helped mutually, offered an opinion mutually promoted the design unceasing optimization well, therefore we have completed the task of design perfectly finally. Key Words Alignment machine four column hydraulic pressure  TOC \o 1-2 \h \z \u HYPERLINK \l _Toc294611735 目录 HYPERLINK \l _Toc294611736 第一章、绪论 PAGEREF _Toc294611736 \h - 4 - HYPERLINK \l _Toc29461