弯曲形变与去应力退火对取向硅钢片磁性能的影响.PDF

下半月出版 Material Heat Treatment 料热处理技术 弯曲形变与去应力退火对取向硅钢片 磁性能的影响 1 1,2 李腾飞 , 王均安 (1. 上海大学 材料研究所, 上海 200072; 2. 上海大学 微结构重点实验室, 上海 200072) 摘 要 采用软磁交流测试仪研究了弯曲形变与去应力退火对取向硅钢片磁性能的影响 结果表明袁取向硅钢片经 过弯曲形变后袁铁损和磁感应强度随弯曲应 的增加而显著恶化曰当退火温度高于500 时袁弯曲形变 向硅钢片试样 的磁性能开始明显恢复曰850 伊 2 h 的热处理能基本消除弯曲形变对铁损的影响曰700 伊 2 h 的热处理能基本消除弯 曲形变对磁感应强度的影响 关键词 向硅钢曰弯曲形变曰磁感应强度曰铁损曰去应 退火 中图分类号 TG 111.92 文献标识码 A 文章编号 Effect of Bending Deformation and Stress Relief Annealing on Magnetic Properties of Grain-oriented Silicon Steel Sheet 1 1,2 LI Tengfei , WANG Junan (1. Institute of Mate rials, Shanghai Unive rs ity, Shanghai 200072, China; 2. Laboratory for Mic ros truc tures , Shanghai Unive rs ity, Shanghai 200072, China; ) Abstract 院The effects of bending deformation and stress relief annealing on magnetic properties of grain-oriented silicon steel sheet were studied by soft AC tester. The results show that: after bending, the iron loss and magnetic induction of samples are badly degraded with the increase of residual stress. The magnetic properties of deformed samples are initially recovered at the annealing temperature above 500 and the iron loss and magnetic induction can be fully recovered at 850 for 2 h and at 700 for 2 h annealing, respectively. Key words 院grain-oriented silico