汽车塑料组件喷涂标准文档资料.pptVIP

07-00 Painting Plastics 07-00 Painting Plastics 塑料组件的喷涂 ----内容. 汽车生产中使用塑料的上升趋势 喷涂塑料 - 为什么 ? 不同的功能 = 不同的方法 塑料组件的喷涂 ---没有喷涂过的新组件. 塑料组件的喷涂 ---已涂装底漆的新组件. 塑料组件的喷涂 ---没有喷涂的旧组件. 塑料组件的喷涂 ---没有喷涂的旧组件. 塑料组件的喷涂---喷涂组件. 喷涂组件 - S.M.A.R.T.---损坏部位. 喷涂组件 - S.M.A.R.T. ---打磨损坏部位. 喷涂组件 - S.M.A.R.T. ---清洁损坏部位. 喷涂组件 - S.M.A.R.T. ---修补方法. 大面积修补---施涂原子灰. 大面积修补---打磨原子灰. 大面积和小面积修补---损坏面积喷涂底漆. 大面积和小面积修补---打磨底漆和旧漆. 大面积和小面积修补---清洁打磨部位/除尘. 大面积和小面积修补---面漆喷涂. 大面积和小面积修补---干燥面漆. 大面积和小面积修补---抛光打蜡. 塑料组件的喷涂 ---产品. 保美冠1:1柔软底漆3300. 保美耐柔软添加剂9050. 保美耐纹理效果添加剂 SA 101 粗纹, SA 102 幼纹. 保美耐哑光添加剂 MA 100. 保美冠柔软清漆 8070 绸缎光泽. 保美冠柔清漆 8075 高光泽. 保美冠哑光清漆 8085. 施必快塑料组件的油漆系统. 塑料组件的油漆系统---高光泽 (单工序系列.) 塑料组件的油漆系统---高光泽( 双工序系列.) 塑料组件的油漆系统---半哑光 ( 单工序系列) 塑料组件的油漆系统---半哑光 -(双工序系列) 塑料组件的油漆系统---纹理效果 -(单工序) 施必快塑料组件的油漆系统---纹理效果 ( 双工序) 塑料组件的喷涂 ---10大重要原则. 塑料组件的喷涂---油漆毛病. 油漆毛病----错用稀释剂. 油漆毛病 ----错用底漆. 油漆毛病 ----没有彻底清洁. Before refinishing an unpainted used plastic component it is important to previously answer some questions. If you cannot answer these questions you should not give any guarantees. Even after you have thoroughly cleaned the used component and then refinished it so it looks very nice, there may be a loss of adhesion after some time. Especially for these unpainted used components it is essential to closely follow the procedure and order of steps outlined here. For further information click on the tin. (= slide 01.50.01) If you are dealing with a painted new component, refinishing it using the recommended system presents no problem. However, if you are dealing with a painted used component you need to check several aspects. Does the old paint still adhere to the substrate? Are there any cracks in the paintwork? Is the paintwork resistant to solvents? Regarding painted used components it is important to focus on the time required for refinishing. If the overall effort exceeds the costs of a new component, it is not recommended to refinish the component. For further information on S.M.A.R.T. or the application of d