广州市地铁3号线汉溪长隆站-市桥站区间隧道设计与施工.docVIP

摘 要 本毕业设计主要包括三个部分，第一部分是汉溪长隆站～市桥站的区间隧道结构设计，第二部分是汉溪长隆站～市桥站的隧道施工组织设计，第三部分是专题部分，主要探究冲积层地下水位上升条件下摩擦桩的受力规律。 在第一部分区间隧道结构设计中，根据设计标段隧道穿越地层的工程条件、水文条件以及周边环境，通过简单的方案比选，最终确定采用盾构法施工方案，同时衬砌结构选择钢筋混凝土，确定盾构区间的最不利断面，计算该断面上的荷载组合，根据荷载组合进行断面管片的内力计算，然后计算配筋，最后根据所求的的内力，进行验算，包括接缝张开量计算、抗浮验算、裂缝计算以及主要经济指标的计算。 第二部分是区间隧道施工组织设计，根据汉溪长隆站～市桥站的施工方案以及周边的情况，对施工的前期准备工作，场地平面布置，隧道开挖以及衬砌结构施工进行编织设计，并且安排了工程进度计划，编写了相应的安全、质量、环境保护等措施。 第三部分是专题部分，内容是利用ABAQUS软件，通过数值模拟的方式，研究冲积层中地下水位上升条件下摩擦桩的受力规律，并提出一些展望。 关键词：隧道；衬砌结构计算；施工组织；ABAQUS；摩擦桩 ABSTRACT This graduation design mainly includes three part, the first part is the structure design of the HanXiChangLong to City Bridge subway tunnel in Guangzhou, The second part is the design of the HanXiChangLong to City Bridge subway tunnel construction organization, The third part is special subject part which is the study of The stress law of friction pile when groundwater rises in alluvium. In the design of the first part, flat concrete lining and shield construction has been decided through the scheme comparison and selection, according to the engineering geology, hydrogeological conditions and environment conditions, and then determine the load section and the section suffered, calculate the internal force of the segment and splaying amount of joints. After that, the anti-floating checking and crack width checking is made. The second part is the tunnel section construction arrangement design. According to the tunnel construction methods and the environment around, the preparation before the construction, construction site layout, tunnel excavation and lining construction is designed. The project schedule, the quality, the safety and the environment protection are made. The third part is special subject part, I study The stress law of friction pile when groundwater rises in alluvium by studying the ABAQUS software, and using the numerical simulation. At last, put forward some prospects about this subject. Keyword: tunnel; lining structure calculation; construction organizati