火电锅炉汽水系统先进控制研究-控制理论与控制工程专业论文.docxVIP

AbstractABSTRACT Abstract ABSTRACT Because of the characteristics of large time—delay,large inertia，nonlinearity and slow time—varying in some control loops，there are plenty of difficulties when controlling a thermal power boiler object．At present，distributed control system(DCS) has been commonly adopted in large-scale thermal power units of China，and PID， cascade and feed—forward control strategies have been widely used in loop controlling． However，the parameters of most PID controllers are roughly adjusted，which can only guarantee the safety of system and satisfy the fundamental requirements