OBTC-GR0003A 高温测量要求.docxVIP

编号: OBTC-GR0003A File No.:OBTC-GR0003A 编 制 编 制Complied by: 校 对Reviewed by: 审 核Audited by: 标准化检查Standardization checked by: 质 量 会 签QA signed by: 批 准Approved by: 工艺文件名称 工艺文件名称: 高温测量要求 Technological File:Pyrometry Requirements 共 17 页 第 1 页 17 pages in total 1st Page 产品代号：通用 阶段标记：D Product code: common use Stage tag:D 年Y 月M 日D 高温测量要求 Pyrometry Requirements 编号File No. OBTC-GR0003A 产品代号 Product code 通用common use 共17页17 pages in total 第2页2nd Page 1、目的 规定了立式真空水淬炉、真空时效炉、震底式连续水淬炉等工艺要求满足AMS2750E热处理设备上所用热电偶、热电阻和仪器仪表的精度要求、使用要求和校准要求，规定了系统精度和温度均匀性校验要求。 Purpose Precision, use and calibration of thermocouple, heat resistance and instrument are required to meet AMS2750E for vertical vacuum quenching furnace, vacuum water aging furnace, continuous shock water quenching furnace with system accuracy and temperature uniformity calibration are specified. 2、适用范围 适用于公司立式真空水淬炉、真空时效炉、震底式连续水淬炉等满足AMS2750E要求的热处理设备高温测量。 2. Scope of application The file is applicable for vacuum quenching furnace, vacuum aging furnace, continuous shock water quenching furnace,etc. that meet AMS2750E. 3、定义 偏差:未修正的指示温度与真实温度之间的差值。 修正系数：由最近的校准确定的某一度数，必须由传感器、仪表或两者组合（系统）的温度计读数加或减此数，以便获得真实温度。 系统精度误差：未修正的被测试的传感器系统（传感器、导线和仪器）的读数和已修正的测试系统的读数之间的差异。 3. Definition Deviation: the difference between uncorrected indicating temperature and real temperature. Correction coefficient: a HYPERLINK javascript:void(0); thermometer HYPERLINK javascript:void(0); reading from sensor, instrumentation or both (system) plus or minus the degree from the latest calibration to get the real temperature. System precision error: the difference between the uncorrected readings from the tested sensor system (sensor,