基于TMS320F2812的测控硬件系统设计.docVIP

中北大学2008届毕业设计说明书 PAGE 基于TMS320F2812的 测控系统硬件设计 学生姓名： 学号： 学 院： 专 业： 指导教师： 2008年06月 中北大学2008届毕业设计说明书 基于TMS320F2812的测控系统硬件设计 摘要 随着大规模集成技术的发展，数字信号处理器(DSP)在功能、处理速度和处理能力方面都取得了划时代的突破，并广泛应用在数据通信、图像处理、语音处理、自动控制等领域中。 本文首先分析了嵌入式测控系统的系统结构和特点，结合嵌入式测控系统的发展要求分析了基于DSP的嵌入式测控系统的应用需求，并在此基础上提出了基于DSP的嵌入式测控系统结构，设计了基于TMS320F2812测控系统的硬件系统，该测控系统能够为测试产品提供所需的模拟量（D/A），为测试产品提供所需的数字量（A/D），为测试产品提供所需的429串行信号，测试系统可通过标准EPP并口与上位机相联，通过上位机可对该测试及产品进行检测，并有输出显示面板及按键输入功能，整个系统的逻辑控制采用CPLD来实现，便于系统的升级。然后，设计出了该系统的各个组成模块和系统软件。并利用实验室实验的手段实现了部分系统的功能，并进行了电路的调试，证明了该系统的可行性。 关键字：DSP，嵌入式测控系统，CPLD， EPP通信，429串行信号 Based on the TMS320F2812 monitoring system hardware design Abstrct With the development of large-scale integrated technology, digital signal processor (DSP) in terms of functionality, processing speed and processing power have made an epoch-making breakthrough and widely used in data communications, image processing, speech processing, such as in the field of automatic control. This dissertation analyzed the embedded monitoring and control system structure and characteristics of the system, with embedded monitoring and control system requirements for the development of DSP-based embedded monitoring and control system of demand, and on this basis by the DSP-based embedded monitoring and control system architecture Designed monitoring system based on TMS320F2812 the hardware system, the micro-monitoring system for testing products to provide the necessary analog (D / A), to test products for digital (A / D), test system through standard EPP parallel port associated with the PC through the PC can test and The 429 serial signal also can test products, and the output display panel and the key input, the logic control system as a whole CPLD used to achieve, for system upgrades. Then, the design of the various components of the system modules and system software. And use of laboratory means of ver