吉化树脂厂ABS装置润滑及液压系统水污染控制研究-机械工程专业论文.docxVIP

  • 3
  • 0
  • 约4.65万字
  • 约 55页
  • 2019-04-26 发布于上海
  • 举报

吉化树脂厂ABS装置润滑及液压系统水污染控制研究-机械工程专业论文.docx

北京化【=大学硕士研究生论文吉化树脂厂ABS装置润滑及液压系统 北京化【=大学硕士研究生论文 吉化树脂厂ABS装置润滑及液压系统 水污染控制研究 摘要 论文研究厂润滑及液压系统污染控制技术的起源和发展,以及 所涉及的研究内容和应用前景,认为系统水污染影响是仅次于固体 颗粒的重要污染形式,所以吉化树脂厂ABS生产装置上润滑及液压 系统一中水污染控制问题就成为论文的研究内容。 论文引进物理化学的多级分散体系概念来研究水在油中的存在 形式,并详细分析了不同存在形式的水污染会对润滑及液压系统造 成的危害机理和影响程度。 论文分别利用蒸馏法和库仑法实验对库存油料和使用过的油料 中的水含量进行了测定,并根据具体装簧运行情况,选取一些具有 代表性的关键设备,采用定期取样方法对这些在运行设备进行了水 污染程度变化监测,将这些监测结果进行分析,从中探讨各台设备 系统中水污染的生成起因和水污染程度随运行时间的变化特点。 在研究分析ABS生产装置上各台设备润滑及液压系统结构特点 的基础上,找出了水污染对这些系统的主要影响途径和形式,论文 设计并在实验室内进行了齿面传动和滚动轴承在水污染环境下工作 的模拟实验。 在这些理论分析和实验研究的基础上,论文根据各台设备的结 构特点和运行工作要求,结合理论分析和模拟试验数据结果,确定 了ABS生产装置上各类设备润滑及液压系统水污染程度的控制闽 值,并提出了能确保该套装置正常运行的水污染控制措施和技术改 造方案。 关键词:ABS装置,润滑及液压,水污染,控制 !!塞垡!:盔堂堡主竺壅尘丝苎WATER !!塞垡!:盔堂堡主竺壅尘丝苎 WATER CoNTAMINATION CoNTRoL oF LUBRICATIoN AND HYDRAULlC SYSTEM IN ABS UNIT oF JI.HUA PLASTICS PLANT ABSTRACT By investigating origin and development of the lubrication and hydraulic system contamination control,the water contamination,second only to particle,formed in ABS unit of Ji—Hua plastics plant,has been studied. The multistage-dispersion was introduced into researching the forms of water existing in oil,the damage characteristics,every water form could make to lubricating and hydraulic systems,were analyzed systematically. With distillation and coulometry examinations,the levels of water contamination in reserve and used oils have been determined,the levels changed along with these systems working have also been followed to export the development characteristics of water contamination. Researching into the structure characteristics of lubricating and hydraulic system in ABS unit,the main harmful forms of water contamination in these systems have been brought out,some laboratory tests were performed to simulate gear and bear working in system. Based on these theoretical analysis and experiments,the limits, under witch these systems will work well,were acquired,the corrective and improvement means was shown to improve existing work conditions of these systems in ABS unit of Ji—Hua plasti

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档