螺旋与弓形折流板换热器性能对比及螺旋角优化.PDF

252 Vol. 25 No . 2 2005 6 JOURNAL OF LIAONING UNIVERSIT Y OF PET ROLEUM CH EMICAL TECH NOLOGY Jun. 2005 : 16 2- 6952(2005) 02- 0059- 04 * 杨 军, 陈保东 , 孙成家 ( , 113001) : 对螺旋角为的螺旋折流板换热器进行传热和压降性能测试应用英国传热协会的 Tasc3 软件对弓 折流板换热器的运行情况进行了模拟, 得到了相应结构下的总传热系数和压降值通过数据的计 算整理, 在相同流量下, 进行了不同螺旋角的螺旋折流板换热器与弓 折流板换热器在单位压力降下总传热系数的 对比, 同时螺旋角的螺旋折流板换热器的壳程膜传热系数及压降进行对比研究, 优化螺旋角实验 结果表明, 实验用螺旋角的螺旋折流板换热器的总传热系数要比相应结构下的弓 折流板换热器高 59.48% 以上, 研究表明, 实验条件下, 18b螺旋角的螺旋折流板换热器的综合传热性能要优于 123040b螺旋角的螺 旋折流板换热器 : 螺旋角; 螺旋折流板; 弓 折流板; 传热系数; 换热器 : T Q021. 3 :A Performance Comparison Betw een Helical and Segmental Baffle Board Heat Exchangers and Optimization of Helix Angle * YANG Jun, CHEN Bao- dong , SUN Cheng- jia ( School of Mechanical Engineering , L iaoning University of Petroleum Chemical Technology, Fushun L iaoning 113001, P . R . China) Receive 30 Sep tember 2004; revise 15 January 2005; accep te 10 M arch 2005 Abstract: Performance test of heat transfer and pressure drop w as done in the helical baffle heat exchangers with helix angle of 12b, 18b, 30b and 40b. Applying a software Tasc3 of British Heat Transfer Association, the operation situation of heat exchangers of segmental baffle board w as simulated, and the value of heat coefficient and pressure drop was obtained. Through data computation, under the same flow quantity , the overall coefficient per pressure drop of helical baffle board heat exchangers with different helix angles w as com