烟叶醇化车间温湿度监测设计.docVIP

第 PAGE 27 页 共 NUMPAGES 31 页 摘 要 现代温湿度控制已经成为社会中研究的热门的研究参量。由于成为控制参数，温度和湿度不是相互独立的，而是应该在系统必须考虑。并且是工农业生产过程中必然慎重的因素。广泛应用于实验室、花圃、粮仓以及土壤的各个领域。然而古代的温度，湿度的监测则使用温度计、湿度表、双片金属式的测量器与湿度试纸等监测器具。通过对车间温湿度的人工监控不满足通风，降温和除湿运转。人工监测方法费时费力，效率低、随意性大，误差。所以我们需要一种温湿度具有成本低，使用方便、准确的监测仪器控制。使用单片机对温湿度掌控，具备精度高的可控的温湿度、功效明显、空间体积较小、价钱低轻易变通等长处达到了工艺。 本论文经过利用STC系列的单片机、1602液晶显示器、DHT11的温湿度传感器和继电器的掌控模块，很容易的达到温湿度的控制需要。DHT11传感器把收集到的必要数据传输给单片机，通过单片机的处置，体现在液晶屏上。如果温度超过设定值，将会驱动继电器带动负载工作。 关键词：温湿度传感器 液晶显示器 单片机 智能控制 Abstract Modern temperature and humidity control has become a hot research in study of social parameters. As the control parameters, temperature and humidity is not independent of each other, but should be in the system must be considered. As the parameters of the accused, temperature, and humidity is no longer independent of each other, and should consider in the system. And is inevitable in the process of industrial and agricultural production factors of prudence. Widely used in the laboratory, flower beds, granary, and the areas of soil. However the ancient temperature and humidity monitoring use the thermometer, hygrometer, double metal type gauge and humidity dipstick monitoring instruments, etc. Through to the workshop temperature and humidity artificial monitoring does not meet the ventilation, cooling and dehumidification. Low efficiency of manual monitoring method is time-consuming, laborious, optional the gender is big, the error. So we need a kind of temperature and humidity has low cost, easy to use, accurate monitoring instrument control. Using single chip microcomputer temperature and humidity control, high precision control of temperature and humidity, efficacy significantly, space, small volume, low price flexibility and other advantages to process easily. This paper through the use of ST series single chip microcomputer, 1602 LCD, DHT11 temperature and humidity sensor module and relay control, easy to achieve the temperature and humidity con