滚针轴承优化设计及CAD技术的研究.docVIP

浙江大学研究生学位论文 PAGE PAGE 56 致谢 值此论文完成之际，首先向我的指导老师马家驹高级工程师表示崇高的敬意!衷心感谢老师从课题确定到疑难问题的解决至论文审阅过程种所给予的无私的关心和帮助。先生严谨治学、实事求是的科研作风和诲人不倦的热诚态度使学生获益非浅。 同时我还要感谢赞助本课题工作的机械电子部基金委和浙江大学机械系；以及给本课题工作极大帮助和支持的苏州轴承厂和上海红心轴承厂。 浙江大学机械设计教研室的多数教师基本班许多同学在课题进行中提出了不少有益的建议并提供了有力的帮助，在此一并向他们表示深深的谢意！ 摘要 滚针轴承因结构紧凑，承载能力大，结构形式适应性强等优点而日趋广泛的使用。 本文针对目前国产滚针轴承产品技术指标远落后于国际先进水平的现状，以摩擦学的观点和方法，通过对典型型号4544906滚针轴承的结构优化设计，滚针凸度设计的研究和滚针轴承的计算机辅助设计系统的开发研究，以及轴承材料，滚针串光工艺等因素对滚针轴承寿命影响的分析研究，使得4544906滚针轴承的径向动负荷在原有产品的基础上提高18.8%。达到了使滚针轴承的计算寿命在原有基础上提高70%的目的,首次实现了依据滚针轴承的负荷与结构形式进行滚针凸度的定量设计与分析，并使滚针轴承的设计效率提高1倍以上。 Research on Optimal Design And CAD Needle Roller Bearing ABSTRACT According to the compact structure, heavy load capacity and more variety of structure form, needle roller bearing has used widely. This article is aimed at the present condition that technical performance of needle roller bearing in our country is far inferior to the advanced level in the world. Based on tribological point of view and method, by means of the structural optimal design for typical type 4544906,the research on crown design of needle rollers, the development of the needle roller bearing CAD system and the analysis of the inference of bearing material and needle roller finishing technology on the basic rating life of needle roller bearing ,the basic dynamic radial load rating of needle roller bearing, type 4544906, is increased by 18.8 percent over the present product and the basic rating life of it is increased by 70 percent over the present product. It is the first time to perform the quantitative design and analysis of needle roller crown considering the load and the structure of the bearing, and rise the design efficiency of needle roller bearing eightfold. 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc152313043 致谢 PAGEREF _Toc152313043 \h 1 中文 HYPERLINK \l _Toc152313044 摘要 PAGEREF _Toc152313044 \h 2 HYPERLINK \l _Toc152313045 英文摘要 PAGEREF _Toc152313045 \h 3 HYPERLINK \l _Toc152313048 第一章 绪论 PAGEREF _Toc152313048 \h 5 HYPERLINK \l _Toc15