AtlasCopco基本拧紧技术.ppt

. * Oil,scrap, washer * Tightning torque in general! Quality variation of joint members: - Friction from surface treatment, lubrication, material changes, dimension variation. - Dimensions. Specified bolt quality Production errors in threads (intended extension of tool life beyond acceptable limits) Production errors giving paint, dirt, chips etc in threads. Question: Which factor influences the clamp load the most (after torque)? * * * * * * * * 3. Friction If you put 100 % energy into a screw joint you have to assume that 90 % of this energy will be lost in friction (i.e. 40 % in frictio