东风60-10KV降压变电所的电气部分.docVIP

本科生毕业设计（论文） PAGE III 摘 要 变电所是将发电厂的电能经过升压或降压等措施，将电能输送到用户供其使用。本次设计的是东风60/10KV降压变电所的电气部分。 设计内容包括变电所的负荷计算、变电所主接线设计、短路计算、变压器的继电保护设计、防雷设计等。根据负荷计算，确定主变的型号及台数。选定容量20000KVA，两台并列运行；通过对主接线预选方案的经济和技术比较，确定主接线的接线方式；短路计算时先将其改为标幺值再计算其短路电流；变压器的继电保护根据变压器的容量，确定继电保护的保护种类和方式，确定瓦斯保护和差动保护为变压器的主保护，过流保护作为其后备保护；防雷设计根据变电所的大小确定避雷针的个数和高度。 本次设计是针对生产实践，通过分析、计算、比较和论证等设计步骤完成了变电所电气部分设计，能够满足变电所稳定安全供电的要求。 关键词：短路计算；主接线；继电保护；变电所 Abstract Substation to the power plant after booster or other relief measures After changes to enable voltage electricity transmission to users for their use. I designed the substation is Dongfeng 60 / 10KV Substation electrical part of the design. Design is the main contents of the substation load, short-circuit, the wiring design of the main substation, Transformer relay design, mine design. The design for the major part of the electrical substation design, complete power substation security and stability. Substation known under conditions of the load, to determine the main transformer and the Model Number. Capacity of 20,000 KVA selected, two parallel operation; Through the main wiring primaries program of economic and technical aspects of determining the main wiring connection; short-circuit the calculation of its first 11 to subscript calculate the value of its short-circuit current; According to the transformer relay transformer capacity, the protection relay determine the types and forms and gas differential protection and the protection of the main transformer protection, overcurrent protection as its backup protection; mine design based on the size of substations to determine the number of lightning and high The design is mainly for the practice, more calculating, the numerical calculation to meet the electricity substation stabilization of the security requirements Key words：Short-circuit Calculation ；Main Wiring；Relay Protection；Transformer Substation 目 录 TOC \o 1-3 \f \h \z HYPERLINK \l _Toc107644780 第1章 绪 论 PAGEREF _Toc107644780 \h 1 HYPERLINK \l _Toc107644