外文翻译-组合机床的研究与发展.docVIP

The research and development of modular machine tool The machine is a combination of a generic components and special parts of the process of high concentrated special machine. It can be a (or more), more than parts, many, many processing. The machine can complete drilling, reaming,, boring, tapping, turning, milling, grinding and rolling process, high efficiency, stable machining accuracy. Combination machine tools and other special machine tool, general, has the following features: (1) combination machine tools on the general standard of components and parts accounted for all the machine parts of 70-80%, design and manufacture of short cycle, less investment, economic effect is good. (2) the combination machine adopts many knives, and a high degree of automation, thus than general machine high production efficiency, stable product quality, low labor strength. (3) is the universal modular machine tool parts after careful design and long-term production practice, and have special test batches, therefore the stable structure, manufacture, use and maintenance work and reliable. (4) in combination machine processing parts, with special jig, tools and equipment, processing technology and equipment, the quality of on the technical level of operators. (5) when the products processed update, using other types of special machine, its most parts to discard. In general, the combination of machine parts and standard parts can be reused, without further design and manufacturing. (6) combination machine tools to represent combination machine tools, in order to adapt to the cycle of large-scale production needs. Although there are many advantages of modular machine tool, but also disadvantages: (1) the variability of modular machine tool, a universal reconfigured sometimes 10% ~ 20% of the parts cant reuse, and refitted. When large quantities (2) universal modular machine tool parts not for a certain kind of machine design, it is a relatively wide adaptability. This will make th