WCDMA常见无线侧和核心网侧失败和释放原因代码说明列表.docVIP

现象描述：很多时候解码出来的释放或失败原因都是代码，需要找到具体原因描述。 解决方法：协议中有此代码，整理如下。 经验总结：无线相关的原因列表 Cause ::= CHOICE { radioNetwork CauseRadioNetwork, transmissionNetwork CauseTransmissionNetwork, nAS CauseNAS, protocol CauseProtocol, misc CauseMisc, non-Standard CauseNon-Standard, ..., radioNetworkExtension CauseRadioNetworkExtension } CauseRadioNetwork ::= INTEGER { rab-pre-empted (1), trelocoverall-expiry (2), trelocprep-expiry (3), treloccomplete-expiry (4), tqueing-expiry (5), relocation-triggered (6), trellocalloc-expiry(7), unable-to-establish-during-relocation (8), unknown-target-rnc (9), relocation-cancelled (10), successful-relocation (11), requested-ciphering-and-or-integrity-protection-algorithms-not-supported (12), conflict-with-already-existing-integrity-protection-and-or-ciphering-information (13), failure-in-the-radio-interface-procedure (14), release-due-to-utran-generated-reason (15), user-inactivity (16), time-critical-relocation (17), requested-traffic-class-not-available (18), invalid-rab-parameters-value (19), requested-maximum-bit-rate-not-available (20), requested-guaranteed-bit-rate-not-available (21), requested-transfer-delay-not-achievable (22), invalid-rab-parameters-combination (23), condition-violation-for-sdu-parameters (24), condition-violation-for-traffic-handling-priority (25), condition-violation-for-guaranteed-bit-rate (26), user-plane-versions-not-supported (27), iu-up-failure (28), relocation-failure-in-target-CN-RNC-or-target-system(29), invalid-RAB-ID (30), no-remaining-rab (31), interaction-with-other-procedure (32), requested-maximum-bit-rate-for-dl-not-available (33), requested-maximum-bit-rate-for-ul-not-available (34), requested-guaranteed-bit-rate-for-dl-not-available (35), requested-guaranteed-bit-rate-for-ul-not-available (36), repeated-integrity-checking-failure (37), requested-request-type-not-supported (38), request-superseded (39), release-due-to-UE-generated-signalling-connectio