proe2001在win7系统中的安装方法.doc

发此贴也许有人说我是老顽固，既然用上了win7，还舍不得proe2001，野火也罢，2001也罢，即便马上有的开始用CREO，其实做结构，这些只不过是一些工具而已。由于新买的电脑8G内存，xp等32位系统无法识别大于3.2G以上内存，无赖装上了win764位，感觉不错，速度，外观是上了一个台阶。但是我的吃饭工具proe2001无法运行。由于2001的年代太久远现在的64位CPU系统那是都还没有出现。下面是WIN7 64位系统下运行PROE2001的方法：希望对那些老人们有用。 BIN文件夹下的PROE2001.BAT，在WIN7 64位系统下会一闪而过，当使用中断命令观察窗口时，会发现CMD窗口的提示是无法识别处理器的架构，用记事本打开PROE2001.BAT，会发现以下字段 if %PROCESSOR% == INTEL_64 set MC=ia64_nt if %PROCESSOR% == INTEL_486 set MC=i486_nt if %PROCESSOR% == MIPS_R4000 set MC=r4000_nt if %PROCESSOR% == Alpha_AXP set MC=alpha_nt if %PROCESSOR_ARCHITECTURE% == IA64 set MC=ia64_nt if %PROCESSOR_ARCHITECTURE% == x86 set MC=i486_nt if %PROCESSOR_ARCHITECTURE% == MIPS set MC=r4000_nt if %PROCESSOR_ARCHITECTURE% == ALPHA set MC=alpha_nt if not %winbootdir% == set mc=i486_win95 if not %MC% == unset goto mc_done echo ERROR Cannot detect what machine type you have. echo Please make one of the following settings: echo. echo set PROCESSOR=Alpha_AXP - For Windows NT Alpha based machines. echo. echo set PROCESSOR=MIPS_R4000 - For Windows NT MIPS based machines. echo. echo set PROCESSOR=INTEL_486 - For Windows NT Intel based machines. echo. echo set PROCESSOR=INTEL_64 - For Windows Intel Itanium based machines. echo. echo set winbootdir=boot dir - For Windows 95/98 machines. echo. exit :mc_done 其实绝大多数都是已经被淘汰的，需要进行编辑处理，将上述字段修改为如下： if %PROCESSOR% == INTEL_64 set MC=ia64_nt if %PROCESSOR% == INTEL_486 set MC=i486_nt if %PROCESSOR_ARCHITECTURE% == IA64 set MC=ia64_nt if %PROCESSOR_ARCHITECTURE% == AMD64 set MC=i486_nt if %PROCESSOR_ARCHITECTURE% == x86 set MC=i486_nt if not %MC% == unset goto mc_done echo ERROR Cannot detect what machine type you have. echo Please make one of the following settings: echo. echo set PROCESSOR=INTEL_486 - For Windows NT Intel based machines. echo. echo set PROCESSOR=INTEL_64 - For Windows Intel Itanium based machines. echo. echo set PROCESSOR_ARCHITECTURE=AMD64 - For Windows AMD 64 based machines