- 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
- 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
- 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
The Chinese version of standards has
precedence to their English translations
which are only for internal reference.
本英文版为内部资料,仅供参考,以中
文版为准。
National Standard for Environmental Protection
GWKB 2——1999
——
Pollution Control Standard for Hazardous
Wastes Incineration
危险废物焚烧污染控制标准危险废物焚烧污染控制标准
危险废物焚烧污染控制标准危险废物焚烧污染控制标准
1999-12-03 Issuance 2000-03-01 Enforcement
Issued by the State Environmental Protection Administration
Content
Forward
1 Scope
2 Reference Standard
3 Terminology
4 Technical Requirement
5 Control Limit for Pollutants (Items)
6 Supervision and Monitoring
7 Implementation of Standard
标准分享网 免费下载
Forward
This Standard is established especially to implement “ the Environmental Protection Law of the People’s
Republic of China” and “the Prevention Law of the People’s Republic of China on Solid Wastes”,
strengthen the pollution control of hazardous wastes, protect environment and guarantee people’s health.
This Standard covers the pollution control for the whole process of hazardous wastes incineration, taking
concentrated continuous incineration facilities as standard and the actual conditions of our country into
consideration; Comprehensive utilization of thermal energy shall be considered for incineration facilities
provided with heat recovery plants.
This Standard is proposed by the Pollution Control Department of the State Environmental Protection
Administration.
This Standard is under the control of the Science and Techn
您可能关注的文档
- GB 601-1988 化学试剂 滴定分析(容量分析)用标准溶液的制备.pdf
- GB 699-88 优质碳素结构钢技术条件.pdf
- GB 773-1998 结构钢锻件技术条件.pdf
- GB 997-1981 电机结构及安装型式代号.pdf
- GB 1183-80 形状和位置公差 术语及定义.pdf
- GB 1183-1980 形状和位置公差 术语及定义.pdf
- GB 1231-91 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术规范.pdf
- GB 1954-80 铬镍奥氏体不锈钢焊缝铁素体测量方法.pdf
- GB 2358-1980裂纹张开位移(COD)试验方法.pdf
- GB 2423.29-1982 电工电子产品基本环境试验规程 试验U:引出端及整体安装强度.pdf
- GB 4476.1-1984 金属船体制图 一般规定.pdf
- GB 4661-89 滚动轴承 圆柱滚子.pdf
- 能源审计技术标准14《综合能耗计算通则》GBT2589—2008.doc
- GB 4949-85 铝-锌-铟系合金牺牲阳极化学分析方法.pdf
- GB 4954-85 船舶设计常用文字符号.pdf
- GB 5023-1997 额定电压450 750V及以下聚氯乙烯绝缘电缆 第一部分:一般要求.pdf
- GB 5027-98 制冷设备、空气分离设备安装工程及验收规范.pdf
- GB 5276-85 紧固件 螺栓、螺钉、螺柱及螺母尺寸代号和标注.pdf
- GB 5286-98 堤防工程设计规范.pdf
文档评论(0)