配电开关智能控制与监测装置的分析与其应用.pdfVIP

Research and application of distribution switch intelligent control and monitoring device Abstract At present, due to the less practical application of distribution network automation, and the existing distribution network do not have self-healing function, lead to the result of user outage time become longer when a fault occurred, and usually can not realize the load transfer of non-fault area. The 12kV vacuum circuit breakers are widely used in the distribution system, but we can ’t obtain the health status of the circuit breaker, only through regular maintenance to eliminate the incipient fault. The paper, through the research in the DTU that with the functions of protection and circuit breaker online monitoring to solve the above problems. The main contributions are summarized as follow: 1. The design of the whole hardware system of the DTU device, focusing on the hardware design of the CPU module, IO module and TRIP module. Studied on the protection function of the DTU device, when there was a fault, it can rapid identify the fault. Through the control of distribution switch to isolate the fault and restore the power supply of non-fault area. Studied on the mechanical characteristics of circuit breaker and closing coil current parameters in judging whether the circuit breakers are working in normal operation. By selecting related sensor, realized the acquisition of the mechanical characteristics of circuit breaker parameter, through mechanical characteristic parameters obtained, draw out circuit breaker trip time curves and closing coil current curve, used on analysis and judged whether the circuit breaker operating mechanism is normal.