用于特种装备滑油加注的多功能辅助装置研制.pdfVIP

第39 卷 第 6 期 舰 船 科 学 技 术 Vol. 39, No. 6 2017 年 6 月 SHIP SCIENCE AND TECHNOLOGY Jun. , 2017 用于特种装备滑油加注的多功能辅助装置研制 杨顺成，王建兵，胡登明 ( 中国船舶重工集团公司第七〇四研究所，上海 200031) 摘 要: 现有用于某船用特种装备滑油加注的设备与方法存在很多弊端，因此有必要研制一套综合性多功能 的辅助装置解决这些问题。整个装置分为滑油泵机组和加热机组，可分可合，前者抽吸油桶里的汽缸油并能向油箱 或油罐远距离注油，后者既能单独给油桶水浴加热，也能同时给油箱里的和输送管道里的汽缸油实行热水循环加 热。本文详细介绍装置的主要组成、工作原理和使用方法，现场应用结果证明其技术性能符合设计要求，满足实际 需要。 关键词：蒸汽汽缸油；加热；辅助装置；泵吸；热水循环 中图分类号：U661.72 文献标识码：A 文章编号： 1672 – 7619(2017)06 – 0137 – 05 doi ：10.3404/j.issn.1672 – 7619.2017.06.028 Development on the multifunctional accessorial device for injecting lubricating oil into certain marine special equipment YANG Shun-cheng, WANG Jian-bing, HU Deng-ming (The 704 Research Institute of CSIC, Shanghai 200031, China) Abstract: Its very necessary to develop the integrated accessorial device because there were many deficiencies in exist- ing devices and methods for injecting the steam cylinder oil into certain marine special equipments. The device was com- posed of lubricating pump unit and heating unit both of which could be combined or separated when used. The former was used to pump the steam cylinder oil from lubricating cans and transfuse it into oil tanks or cans in the distance, and the latter could heat oil cans in hot water individually, as well as do the cylinder oil in oil tanks and pipelines synchronously by circu- lating the hot water. Main composing and working principles and operating procedures were introduced in detail. Marine