打印机储纸盒左侧支架冲压工艺及模具设计.docVIP

摘 要 本设计为打印机储纸盒左侧支架（以下称储纸盒支架）冲压工艺及模具设计，由零件的结构、材料、及板厚等多方面因素决定了设计方案。此零件共需两道冲压工序来完成，所需的两套模具分别为一套落料冲孔复合模、一套弯曲复合模。在此设计中详细阐述了两套模具的设计过程。 首先，对储纸盒支架零件进行工艺分析，了解材料的力学性能，并决定了冲压工艺方案。第一套模具为落料冲孔复合模，与单工序模相比主要优点是生产效率和冲压件的精度高。第二模具为弯曲模复合模。在工艺方案分析中，确定了毛坯件的展开尺寸、排样方式以及选择合理的冲压方案。 然后，设计两套模具的具体结构形式。第一套模具中，确定了凸凹模刃口尺寸、压力中心、冲裁力和冲压设备。第二套模具中，确定了弯曲力和冲压设备。 关键词：冲压工艺 模具设计 落料冲孔复合模 弯曲模 Abstract The printer is designed to support the left side of storage box (the followings referred to support storage carton) stamping process and die design, based on the structure of parts, materials, and thickness and other factors determined the design.The parts needed two working procedure to complete the stamping process, Two sets of the necessary tooling for a composite blanking punching mold, and a composite bending modulu .The design elaborated two sets of detailed mold design process. First, the parts storage boxes stent technology analysis, to understand the mechanical properties of materials and decided to program the stamping pared with single-process mode is the main advantage of productivity and high precision stamping parts. Bending mode for the second mold compound die. Program in process analysis, to determine the start of the rough pieces of size, layout, and the choice of a reasonable program of stamping. Then, the design of the specific structure of the two forms of mold. The first set of mold to determine the size of convex and concave edge mode, the pressure center, punching and stamping equipment. The second set of mold to determine the bending and stamping equipment. Key words: Stamping Process Mold Design Compound die blanking punch Bending modulus TOC \o 1-3 \h \z \u 目录 HYPERLINK \l _Toc232747896 摘 要 PAGEREF _Toc232747896 \h 1 HYPERLINK \l _Toc232747897 引 言 PAGEREF _Toc232747897 \h 4 HYPERLINK \l _Toc232747898 我国冲压模具的现状与发展 PAGEREF _Toc232747898 \h 4 HYPERLINK \l _Toc232747899 一、冲压模具市场情况 PAGEREF _Toc232747899 \h 4 HYPERLINK \l _Toc232747900 二、冲压模具水平状况 PAGEREF _Toc232747900 \h