管线钢连铸轻压下工艺的研究.pdfVIP

第22 卷第4 期 　 　 　 　 钢 铁 研 究 学 报 Vol.22, No.4 2010 年4 月 　　　　　　　　　　　　Journal of Iron and Steel Research 　April　2010 管线钢连铸 压下工艺的研究 1, 2 2 1 孙　群 , 　任子平, 　姜茂发 (1.东北大学材料与冶金学院, 辽宁 沈阳 110004;　2.鞍钢股份有限公司, 辽宁鞍山 114021) 摘　要:为了充分发挥铸机动态 压下技术在提高铸坯内部质量方面的作用, 进行了管线钢连铸 压下技术的试 验研究。通过分析中心偏析的形成机理, 研究连铸 压下工艺的设计原则。利用枝晶检验和化学成分分析等手 段, 研究不同 压下位置对连铸坯中碳、锰、磷元素偏析的影响, 从而对现行的动态 压下位置进行了优化调整, 进一步提高了管线钢连铸坯的内部质量。 关键词:管线钢; 压下;中心偏析 中图分类号:TG 142.4　　文献标志码:A　　文章编号:1001-0963(2010)04-0001-04 Soft Reduction Technology of Pipeline Steel Continuous Casting 1,2 2 1 SUN Qun , 　REN Zi-ping , 　JIANG Mao-fa (1.School of Materials and M etallurgy, Northeastern University, Shenyang 110004, Liaoning, China; 2.Anshan Iron and Steel Co, Ltd, Anshan 114021, Liaoning, China) Abstract:In order to sufficiently play the role of this certain continuous caster′s effect on enhancing the internal quality of casting billet, experi ental study on dyna ic soft reduction of pipeline steel casting was finished.The design principle was studied by analyzing the for ulation echanis of centerline segregation.With dendrite test and che ical analysis, the effect of ele ent segregation of carbon, anganese and phosphor at different soft re- duction position was studied.As a result, the dyna ic soft reduction position is opti ized, which can i prove the internal quality of casting billet of pipeline steel. Key words:pipeline steel;soft reduction;centerline segregation 　　连铸 压下是指在铸坯凝固末端一个合适的两 研究有着极其重要的作用。 相区内利用夹辊或其它专门设备,对铸坯在线实施 1　工业试验条件与取样方法 一个合适的压下量, 用以抵消