一种新型模块化多电平换流器电平数倍增方法研究.docVIP

一种新型模块化多电平换流器电平数倍增方法研究* 刘毅，刘振兴（） 摘要：提出新型模块化多电平换流器拓扑在传统模块化多电平拓扑上，将每个桥臂一子模块替换成3个新子模相应的控制策略，可以将桥臂电平提高2N+1。最终将交流侧相电压电平等级提高4N+1。在MATLAB/Simulink环境下，根据提出的拓扑结构搭建系统仿真模型。 关键词： 中图分类号：TM933 文献标识码：B Research on a new modular multilevel converter level multiplier method Liu Yi, Liu Zhenxing, Li Cui (Wuhan University of Science and Technology, Wuhan 430081, China) Abstract: A new modular multilevel converter topology is proposed in this paper. On the basis of traditional modular multilevel topology, a conventional sub module of each arm is replaced by 3 new sub modules, and the capacitance of