非对称混合级联型多电平逆变器调制方法研究-电气技术.PDF

非对称混合级联型多电平逆变器 调制方法研究 王鹏帅 韩如成 （太原科技大学电子信息工程学院，太原 030024 ） 摘要 非对称混合级联型多电平逆变器具有在基本单元级联数目相同的条件下输出更多电平 等级的优点，并且由于各级联单元采用不同的开关器件，能够充分发挥不同开关器件优势的优点。 本文基于一种新型的级联型多电平逆变器拓扑，对其拓扑进行进一步的改进，并且在非对称混合 级联拓扑电路的基础之上来对其调制方法进行了深入研究。文中给出了非对称混合级联型多电平 逆变器的新型拓扑电路，探讨了与之相适应的调制方法，特别是给出了阶梯波调制触发角的计算 方法。最后通过仿真验证了调制方法的正确性与有效性。 关键词：非对称；混合级联；拓扑电路；触发角计算；调制方法 Research on Asymmetric Mixed Cascade Multi-level Inverter Modulation Method Wang Pengshuai Han Rucheng (Taiyuan University of Science and Technology, Electronics and Information Engineering, Taiyuan 030024) Abstract Asymmetric mixed cascade multi-level inverter has the advantage of output more level grades in the same number of basic units cascaded ，And since the linking unit at various levels using different switching device, can give full play to the advantages of the advantages of the devices of different switching. This article based on a novel cascade multi-level inverter topology, had further improvements for its topology and had in-depth research in asymmetric hybrid cascade topology circuit. Given asymmetric mixed cascade multilevel new level inverter topology circuit to explore with suitable modulation method, especially given the method of calculation of the firing angle of the ladder wave modulation. Finally, the correctness and superiority of the modulation method is verified by simulation. Key words ：asymmetric; hybrid cascade; topologies circuit; firing angle calculation; modulation method 级联型多电平逆变器基于低压小容量逆变器级 联型多电平逆变器的应用范围[4] 。另一方面，当级 联的组合方式，技术成熟，易于实现，较适合七电