推挽式直流开关电源设计工作方案.docVIP

辽宁科技大学本科生毕业设计 第 PAGE 22 页 推挽式直流开关电源的设计 摘要 随着现代通讯技术的飞速发展，对通讯电源的重量、体积、可靠性、效率等提出了更高的要求。而应用于中大功率场合的移相全桥DC/DC变换器具有结构简单、输出功率大、效率高、易实现软开关、功率开关管所承受的电压电流应力小等一系列优点，因此，对它进行研究具有十分重要的意义。本文首先对DC/DC升压变换器的电流触发主电路、输入电路、反馈电路控制芯片、推挽变压器进行了详细的讲解，其中重点对MOS场效应管的损耗问题进行了研究和分析。其次本文也对本实验用到的器件进行了简单的介绍并给出了所需器件的参数，建立了模型并用Protel Altium Designer 6.9仿真软件对系统的稳定性进行了分析。最后根据自己的仿真结果做出了实际电路并进调试一切正常，达到了所需要的效果。 关键词：DC/DC电压变换器；推挽变压器；反馈电路控制芯片 Abstract With the rapid development of modern communication technology, communication power of the weight, volume, reliability, efficiency, and put forward higher requirements. The power applied to the phase-shifted full-bridge where the DC/DC converter has a simple structure, high output power, high efficiency, easy to realize soft-switching, the power switch is exposed to a series of voltage and current stress of the advantages, therefore, its study is of great significance. This article first DC/DC boost converter current triggering the main circuit, input circuit, feedback circuit control chip, push-pull transformers were in detail.The focus of the MOS FET loss problems were studied and analyzed. Secondly, the paper also used in this study a brief introduction devices and gives the necessary parameters of the device, the establishment of a model and simulation using Protel Altium Designer 6.9 software to analyze the stability of the system. Finally, the simulation results according to their actual circuit and thus made all the normal debugging, achieves the required effect. Keywords: DC/DC boost converter。 push-pull transformer。 feedback circuit control chip 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc295238673摘要 PAGEREF _Toc295238673 \h I HYPERLINK \l _Toc2952386741 绪论 PAGEREF _Toc295238674 \h 1 HYPERLINK \l _Toc2952386751.1开关电源的发展历程 PAGEREF _Toc295238675 \h 1 HYPERLINK \l _Toc2952386761.2开关电源的分类 PAGEREF _Toc295238676 \h 1 HYPERLINK \l _Toc2952386771.2.1按驱动方式分类 PAGEREF _Toc295238677 \h 1 HYPERLINK \l _Toc2952386781.2.2按