钢筋混凝土带腋撑框架结构.docVIP

Reinforced Concrete Frame Structure with Haunch Braces Cai Jian1, 2 Zhou Fei1, 3 Zhong Guo-kun1 Yang Chun1, 2 （1.School of Civil Engineering and Transportation, South China Univ．of Tech．, Guangzhou 510640 , Guangdong , China; 2. State Key Laboratory of Subtropical Building Science Guangzhou 510640, Guangdong, China; 3. Architectural and Planning Design Institute of Guangdong Advanced Education ,Guangzhou 510631, Guangdong, China）Abstract: A new kind of reinforced (prestressed) concrete (RC) frame structure, the RC frame structure with haunch braces, is proposed, which is composed of conventional RC frame structure and haunch braces. The haunch braces are connected rigidly with structural beams and columns. By adding the haunch braces the designing controlling cross sections located at the ends of beams and columns for RC frame structure are changed to the joints connecting the haunch braces with beams and columns, the moments at the designing controlling cross sections and the mid-span deflections of the structural beams are significantly decreased. Experimental results show that the new developed RC frame structure with haunch braces exhibits good mechanical behaviors. It can be extensively applied to one or multilayer large span concrete buildings and other civil engineering constructions. Key words: frame; structure; haunch braces; large span; mechanical behavior Reinforced concrete (RC) frame structure has been widely applied to the field of civil engineering, especially multilayer and tall buildings for its good economic characters, convenient construction and applicability. Extensive researches have been conducted and fruitful achievements have been obtained, and relative much perfect design theory and methods have been set up in design codes[1-3]. However, under the requirements of building functional diversity, there are insurmountable obstacles in existing RC frame structure. For example, for large span architectural structures, moments at the ends and m