面向工程件的ttec控制板的设计与实现-通信与信息系统专业毕业论文.docx

键电路模块设计，提高硬件的可靠性；而在软件设计方面， 键电路模块设计，提高硬件的可靠性；而在软件设计方面， 重划TTEC中主处 理芯片任务，重新设计数据采集、CAN通信、存储器控制等功能模块，以较优 的资源配置实现软、硬协同工作，最终提出并实现较为可行的工程件设计方案。 通过多种途径的测试验证，TTEC工程件在功能及可靠性方面较原型件有较大的 提高和改善，基本满足飞行件的功能要求。由于条件受限，目前的对TTEC工程 件的测试验证仅局限在仿真回路环境，在真实TTCS回路中的运行情况将有待进 一步验证。 关键词：AMS．02，TICS，TTEC，CAN通信 II Title：The Title：The Engineering Model Oriented Design and Implementation ofTTEC Board Major：Communication and Information System Name：Feng Guocong Supervisor：Professor Ni Jiangqun Abstract The thesis bases on the project“The Development of Alpha-Magnetic Spectrometer (AMS)Thacker Thermal Control System(TTCS)”，which WaS one of the“key projects of international scientific and technological cooperation’leaded by Mimstry of Science and Technology of China in 2003．AMS，which includes two phases～ AMS·01 and AMS一02，is the international project collaborated by 56 research institutes of 1 5 nations，aiming at searching for the anti-matter and dark matter in the space and studying the ingredients and energy charts of cosmic radial． Developed cooperatively by Sun Yat—sen University(China)，Massachusettes Institute of Technology(USA)，National Aerospace Laboratory(Netherlands)，TTCS， plays an important role in keeping the temperature at a certain level SO that the tracker can operate effectively for 3-5 years in the space．As one of the members in TTCS development，Sun Yat—sen University haS three teams working collaboratively,namely, the Electronic Group，the Thermal Group and Mechanical Group．Specifically,the Electronic Group is responsible for the development of Tracker Thermal Control Electronics(TTCE)，one of the subsystems in TTCS．As the main control board of TTCE，TTEC is served to acquire data of the temperature of TTCS Loop Components， establish reliable communication with JMDC(Joint Main Data Acqusition Computer) and operate closed loop control and health guard control for the temperature ofthe components． The development of TTEC is divided into three phases—Ptototype Model(PM)， Engineering Mo