饮料灌装生产流水线的设计.docVIP

毕 业 设 计（论 文） 题目：饮料灌装生产流水线的设计 （英文）：Mechanical Design Of Beverage Filling Production Line Design 院 别： 机电学院 专 业： 机械电子工程 姓 名： 学 号： 指导教师： 日 期： 饮料灌装生产线的设计 摘要 啤酒饮料灌装生产线的自动化程度在国外发达国家的发展水平已经较高，而在我国尚处于启动阶段。本设计系统地设计了一条生产能力为2万瓶/小时的啤酒灌装生产线，为了提高生产效率，保证灌装生产线畅通灌装生产，根据生产要求和生产能力选择单机型号以及对灌装工厂布局的设计，然后对输瓶系统和输箱系统设计，同时设计一段输瓶系统的电气控制，选用三菱PLC对输瓶链电动机进行调速控制，主要是对输瓶速度的自动调节。最后选择了对灌装压盖机传动系统的设计，根据其生产能力，为保证瓶装平稳进行灌装，选择适合的传动比，设计合理、可靠的传动系统，其中包括带轮、蜗轮传动以及，齿轮传动。 关键词：啤酒生产线；灌装压盖机；PLC；机械设计 Mechanical Design Of Beverage Filling Production Line Design ABSTRACT Beer beverage filling production line automation in foreign developed country development level is higher, and in our country is still at the starting stage.This design system to design a production capacity of 20000 bottles / h beer filling production line, in order to improve production efficiency, ensure the filling production line smooth filling production, according to production requirements and production capacity selection of single models and for filling plant layout design, and then on the bottle conveying system and a transmission box system design, while design a bottle conveying system of electrical control, selects the Mitsubishi PLC on bottle conveying chain motor speed control, mainly on the bottle conveying speed automatic adjustment. Finally I chose to filling and capping machine drive system design, according to its production capacity, in order to ensure the smooth filling bottled, choose a suitable transmission ratio, reasonable design, reliable transmission system, which comprises a belt wheel, worm gear drive, gear drive. Key words：Beer Production Line; Filling And CappingMachine;PLC; Machine Design 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc325102820 1概论 PAGEREF _Toc325102820 \h 1 HYPERLINK \l _Toc325102821 1.1啤酒包装业的发展状况 PAGEREF _Toc325102821 \h 1 HYPERLINK \l _Toc325102822 1.1.1国内啤酒灌装的发展情况： PAGEREF _Toc325102822 \h 1 HYPERLINK \l _Toc