约克品牌介绍精编版课件.ppt

* * This is a list of customers that have purchased a York VSD. * 36 * When the condenser water temperature is 85?the refrigerant pressure is high enough to keep oil from penetrating the seals. * Eventually, the lubrication system will lose enough oil that the chiller will shut down. In order to re-start the chiller, the manufacturer must send a service technicians to add oil to the system and re-engage the control panel. * Why? Because less that 1% of chiller run hours are at design full-load. Why spend your time maximizing performance there? * So what? How does lower condenser water save energy? * 要让客户了解低冷却水温给其带来的收益： 耗电减少，电费减少。 * Simply, the lower the condenser water temperature the lower the energy cost. * Simply, the lower the condenser water temperature the lower the energy cost. * Why? Because less that 1% of chiller run hours are at design full-load. Why spend your time maximizing performance there? * 36 * 41 5 * 40 6 * * 36 * 由于是YORK独有，所以可以尽情发挥。 可以将控制系统分三个级别对各厂家进行归类： 螺杆机国产小厂家：机械控制 （红灯 绿灯） 其它厂家：文字、数字显示，键盘控制 YORK：彩色动画显示屏 * * * * * 36 * （1）?? 可提前六周设定机组日程表，自动控制冷水机组的开停。 （2）?? 可以专门为节/假日输入时间表。 （3） 10次停机全信息记录，故障自动诊断报告。 * …to the oil temperature. Up to 6 items can be tracked and displayed at a time. These displayed items are chosen from a list of 244 values in the panel. The list of items is accessible on the “Trend setup screen”, and can be changed from the “Operator” or “Service” Access Level. * 36 * * You can think of your accelerator as the chiller’s electric motor. You can also think of the brake as the prerotation vanes. Constant Speed If you have a constant speed chiller, the electric motor runs at a constant speed regardless of load. If the chiller needs to operate at off design conditions, prerotation vanes restrict the amount of refrigerant allowed in the compressor. Using the car analogy, you can think of the accelerator pegged to the floor and the only way to slow down is to press the brake. Variable Speed If you have a variable s