基于PLC的铸坯火焰自动切割系统的设计毕业论文.doc

毕业设计说明书（论文）中文摘要 本文通过研究铸坯火焰切割机的系统结构，将PLC控制技术应用于连铸火焰切割机，以解决连铸生产线上铸坯的定尺精度，切割质量等关键技术问题。该系统的特点有：定尺测量系统工作可靠，切割机与铸坯同步运行平稳、可靠、无滞后现象，快速返回原点定位误差小，其应用了可编程控制器为控制单元的新型火焰切割机控制系统。本课题选用的可编程控制器是西门子S7-200，并对软硬件进行了详细设计。其中PLC是火焰切割机的控制单元，通过它采集火焰切割机上各类传感器信号、工作参数、及工作状态等信息来向控制系统发送操作命令。实践证明，本文所设计的基于西门子PLC的铸坯火焰切割系统的软硬件是成功的，结构简单，性能良好，为今后开发类似系统奠定了良好基础。 关键词 可编程控制器 连铸火焰切割机 定尺系统 毕业设计说明书（论文）外文摘要 Title the Cast Slab Flame Cutting System based on Siemens PLC Abstract The system structure of cast slab flame cutting machine is briefly introduced in this paper, and PLC control technology is applied to solve the scale accuracy on continuous casting production line, besides cutting quality control and other key technologies are analyzed. The features of the system are as follows: reliable measurement system of scale,?saving time of billet subsection, steady and unlagged synchronous running between the flame cutting machine and casting blank, the accuracy of rapid return to the grass root and application of the programmable logic controller as control unit for a new type of flame cutting machine control system. Siemens S7-200 is chosen as the programmable logic controller in this paper and makes design of hardware and software. PLC is control unit of flame cutting machine, with which the operator send signals to the control system. In addition, it would also collect the signals of flame cutting machine’s and other types of switches, as well as the work status, etc..The practice has proved that the design of the cast slab flame cutting system based on Siemens PLC software and hardware flame to be a successful, with simple structure, good performance which lay a solid foundation for the future development of a similar system. Keywords Programmable logic controller Cast slab flame cutting machine Fixed scale system 毕业设计（论文）原创性声明和使用授权说明 原创性声明 本人郑重承诺：所呈交的毕业设计（论文），是我个人在指导教师的指导下进行的研究工作及取得的成果。尽我所知，除文中特别加以标注和致谢的地方外，不包含其他人或组织已经发表或公布过的研究成果，也不包含我为获得