基于组态软件的锅炉温度与液位检测系统毕业设计论文.doc

前言 基于组态软件的锅炉温度与液位检测系统毕业设计论文 PAGE PAGE I 基于组态软件的锅炉温度与液位检测系统 摘 要 本次设计以力控组态软件实时检测锅炉温度与液位控制系统为背景，主要内容利用北京三维力控科技公司的全中文工控组态软件ForceControl6.1 设计锅炉温度与液位监控系统,在上位机上显示每个控制系统的结果,并可以对比实时温度与液位曲线和设定曲线。本文首先说明了自己对锅炉等元器件的认识并对锅炉的控制系统做了简单的介绍，然后又对整个系统做了介绍。其中重点阐述了ForceControl6.1组态软件,以及各个元器件的作用，整个系统各个模块的功能与作用。同时对组态软件做了详细说明，介绍了如何绘制组态图和动画的连接，然后又对该系统做了仿真演练,用仿真来实现锅炉温度与液位的检测功能，经过多次实践和不断的改善从而完成了整个毕业设计。 关键词：锅炉温度检测，锅炉液位检测，组态软件。 Based on configuration software boiler temperature and liquid level detection system summary The design for the force control configuration software for real-time detection of boiler temperature and level control system for background, the main content of Beijing 3 d force control technology company all Chinese industrial control configuration software ForceControl6.1 design boiler temperature and liquid level control system, in the upper machine shows each control system of the results, and can compare with liquid level curve and real-time temperature set curve. This paper first explains to the boiler of components to know and to the boiler control system simply introduced, and then the and of the whole system are introduced. One focuses on ForceControl6.1 configuration software, and the various components of the function, the function of each module of the whole system and function. At the same time for configuration software to do a detailed explanation, this paper introduces how to draw configuration diagram and the connection of animation, and then to the system did simulation practice, use the simulation to realize the boiler temperature and the liquid level detection function, after many practice and continuous improvement and has completed the graduation design. Keywords: boiler temperature detection, boiler liquid level detection, configuration software. 目　录 TOC \o 1-3 \u 绪 论 h 1 第1章 部分元器件的介绍 h 2 1.1 锅炉 h 2 1.2 传感器 h 4 1.3水泵 h 6 1.4阀门 h 7 1.5报警器 h 9 第2章整体系统简析 h 10 2.1 系统流程 h 10 2.2进水模块 h 12 2.3温度与液位模块 h 13 2.4出水模块 h 14 第3章组态软件 h 16 3.1 组态软件的基础