面向机场助航的LED光强控制系统设计与实现-控制理论与控制工程专业毕业论文.docxVIP

华 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract LED light intensity control system is a necessary visual equipment for controlling the airfield light intensity which can provide accurate information about the landing way and protect the aircraft from crash in the addition of takeoff, landing, taxiing during night, poor visibility condition or other more complex cases. LED light intensity control system ,which nowadays we pay attention to ,is the core control equipment of airport airfield dimmer system. At present, the common Airfield dimmer at home and abroad mainly used electric incandescent lamp as the main illuminant and its color is similar to white light. We can use colorful lamp-chimney if we want to make the light looks different. This kind of dimmer has imperfection such as low efficiency, high required power, short useful life, complex structure, low intensity and so on. With the rapid development of LED technology ,micro-controller technology, and Accompanied by proposed the slogan of the energy saving, it has become possible to use the LED as the illuminant instead of the normal source . This thesis relies on the specific project, in order to realize the light intensity control for a single LED Airfield Dimmer, the author proposes a control solution based on the common Airfield dimmer by summarizeing the development status at home and abroad of dimmer. The thesis firstly analyzes and compare LED light with the normal light, and then described in detail the software and hardware design of LED Airfield Dimmer control system, and highlights the main modules design and implementation. The system uses the ATMEL companys ATmega88 as the master controller to execute all-digital task including controling the power circuit of the inverter by using the pulse-width modulation (PWM), then the load circuit. System design also includes a liquid crystal display ,it can show the current electric, current voltage, and current level of light. Finally, the experimental results